Jump to content
SAU Community

Recommended Posts

Today I spotted a dark blue s2 R33 GTSt on the bridge at Toongabbie (rego BFE-??? or similar) and a silver V35 fuelling up at the little servo on the corner of Gilba and Targo Roads in Girraween.

haha that was meeeee

Only 1 in Aus believe it or not original build No#001 R34 ZTUNE GTR in Sydney !

I've seen this guy around too! Has red vic license plate "ZTUNED" I think

Missed a green light cause I kept looking at it :D luckily no one was behind me.

that one has apparently left AUS for good and that was build no#014 I think, build no#001 is now the only 1 out of the 20 built in the world left in AUS

Edited by GMASTR

there could possibly be two z tunes in the country at the moment

build #004 "ZTUNED" from vic... apparently has only been rumours of sale, but currently still for sale

build #001 just came up on SAU http://www.skylinesaustralia.com/forums/tu...01-t336373.html

spotted 2 33GTR's yesterday to my delight, one near UWS parra with the plates: BPP-485 and one that i didn't catch the plates on parra rd near the audi dealership

both looked pritty damn sweet.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...