Jump to content
SAU Community

Recommended Posts

Naw weren't me Kat. I shot down the M4 from Springwood but took the back roads home via Cumberland Highway and Pennent Hills Road.

Who's the imposter posting as me in a White R33 GTR? hehe.

And Yes, on a bad day Paramatta Road can be shockers! My first time to the SAU clubhouse took 45 mins from Homebush to Haberfield.

Spotted a white series 1 r33 this morning about 8:15 had a passenger in front (2 guys) - hume highway warwick farm, lansvale and carramar

Unfortunately you were acting like an absolute tool if your on here, speeding and diving through traffic to catch up and go past me...your not kimi and your not on a track some of the lane changes your were doing were down right dangerous....its because of guys like you us real enthusiasts get called hoons.

Keep it on the track mate, also you didnt impress me at all. I dont know if you were trying to race me or what but i aint no hoon

Fyi had it been a track:

3e0ecd48.jpg

http://www.youtube.com/watch?v=DUONPuLpLJ4

I would have put you in your place for being a hard c@#t

/end rant

Hey JDM34 are you always around rockdale? I always see a silver r34 and a white one, I'm a local haha lol.

Might be me, i live in the heart of Rockdale....though if its one parked on the street its not me because mines always parked in a disclosed underground carpark :ph34r: if you seen mine its either me leaving or coming home.

Edited by starwarz

Spotted the Maroon R33 GTST with 400R front bar in Albion Park yesterday.

Also gave a wave to someone at AP in a Black R33 GTST, I was in the White R33, black rims.

Mum spotted this in Warrawong.

med_gallery_87442_4726_623632.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...