Jump to content
SAU Community

Recommended Posts

I *think* I saw Merli tonight driving down mona vale rd, otherwise it was another midnight purple '33 with Xenons.

Also had a chat to a dude in a g/metal 32 GTR on mona road, same place as Merli except opposite direction and 10hrs earlier! :)

Thanks.  It's very dirty and had the old wheels on it.  Well it might not have had any wheels on it when you saw it as I got some new rotors put on the front and had the back ones skimmed.

 

Was yours the grey one?

No mines the Black R34. You might not have seen it.

Yeah I was told your brakes were squealing.

Later today after school I saw an R31 GTS-2 in the lowest level in the carpark.

Nice bright red paint, looked like 4 stud roh drift R rims with some negative camber. Had full gts-2 body kit, Nismo sticker on the rear window.

i think plates were GTS - 112

Nice car.

Spotted: Servo full of Skylines in St Ives last night, good timing and not a bad cruise either fellas.

ooo!!! was that mintie and crew??? they were heading to palm beach last night!!!

And they started off at homebush!! but i don't remember seeing a yellow 34... so maybe that was another group....

Saw a nice white '33 today driving down mona vale rd at about 2pm - i flashed and got a flash back, female asian looking driver.

Also saw a wine red '33 on Mona vale rd about the same time.

Seen a black r32 gts-t twice today. had a GTR front bar and grill ( could have been a GTR ).

First time was on Old Bathurst RD, he was heading towards penrith.

Second time was when we were coming home from Emu plains, he was at the Mulgoa Rd lights waiting to get onto the M4 with what looked like his friend in a WRX behind him.

JB - 159

purple R33 GTR, plate GTR-028 spotted on Victoria avenue chatswood. Nice GTR, with big FMIC and nive 5 Zigen wheels. Had a big SAU sticker accross the windscreen too :(

Richard

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...