Jump to content
SAU Community

Recommended Posts

Hi guys, I have been considering an aftermarket mechanical LSD, probably a Kaaz 1.5 -way and was wondering if anyone has experience / an opinion on the durability of these.

My car is an R33 GTST with some basic mods and is my daily driver. I want the diff for the odd track day here and there and for the occasional traffic-light grand prix.

I have read plenty of positive reviews here about the aftermarket LSDs but ultimately I want something that is also going to last. If the Kaaz unit isn't going to give me more than say 20,000km then maybe I would be better off shimming up the standard diff every so often?

Any advice appreciated

is your concern based on anything ? and what exactly are you woried will wear out ?

Just worried about how quickly the friction plates might wear out.

I guess my concern was that while I had read a lot of positive information about these diffs, I couldn't seem to find any info about how long they last.

I just don't really want to spend $1300 or thereabouts on a new diff and then have to replace it after 18months of mainly street driving.

If anyone has any experience with these things on a daily driver and has got a decent amount of kms out of it, be it the Kaaz, Nismo, Tomei, I would be interested to know.

My shimmed/rebuild stock diff is mechanical, it was the first thing done really, and that was about 10,000-15,000 ago now. Still going strong without a hint of issues.

A Kaaz would be the same, as with all other diff's. Nothing will last however if you abuse it every day of its life

It's the length of a piece of string mate. There's no exact km a diff or gearbox will last, there's not even an approximate. Even on the known weak gearboxes I deal with there can be 80,000km difference between two cars when the "factory faults" begin to show.

A diff, even mechanical LSD, can outlast the engine if you drive it with that as your goal...it can last you 10 minutes if that is not your goal. Don't expect to get away with treating mechanical items harshly and being able to use mileage as some sort of wear indicator, because something can go on you at any minute.

The worst mistake people make is not running in a new or freshly rebuilt/reconditioned drivetrain component. I've sent out diffs that come back for warranty a week later and the customer was stupid/honest enough to leave their bald tyres on the car and worn down crown/pinion inside the diff housing.

  • 4 weeks later...

Mine is extremely noisy. Pedestrians will definitely hear it. When cold its fine, drives like a viscous. Its when its warm that it gets savage.

But u wont be sorry with a kaaz, on a track car, on a daily....................not so much

KAAZ FTW.

Question for Bubba how was the nismo as a daily was it noisy like the Kaaz are?.

Cheers,

Dave

It is noisy, more so when cold (it's really, really tight when cold so it skips and clunks). Once warm it slips when it should but you get a kind of dull grinding sort of noise.

Really, it's about how you drive these things.. hold constant throttle round a corner and it's fine. Go round the corner on decel and it will clunk and skip (I have the 2-way), go round the corner with a little bit of gas and it will clunk and skip.. go round the corner with lots of gas and it's super fun happy slide time :D

Personally, I love it and wouldn't want any other diff.. not putting one in the Stag though :P

Thanks Hamish & Bubba I might look into the 1.5way Nismo that's Seems ok not to noisy is what I'm after thanks for the input people if anyone else has an OS giken to compare with that would close the circle of info that I would need to choose for my GTR.

Cheers,

Dave.

I have the Nismo GT LSD Pro 1.5way in my 32 gtr.

A touch chattery when turning and cold but hardly much chatter when warmed up.

Will chatter slightly though when doing a u turn and warm.

Note: it chatters and cluncks a lot more with the run in oil that comes with it (for obvious reasons) and has quitened down since putting in some castrol diff oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...