Jump to content
SAU Community

Recommended Posts

Hey all,

I got the M35 on Tuesday afternoon and have already put almost 300klms on it :D

I have a quick question, does the xanavi version of the navigation system have the economy leaf and so on? I can not seem to find it if it does. I had a look at the guys M35 around the corner (autech axis) and this has the normal Nissan program with the economy leaf.

Thanks in advance.

Cameron

Link to comment
https://www.sau.com.au/forums/topic/294974-xanavi-help-on-m35/
Share on other sites

all nav units are xanavi units?

im pretty sure

it's the 3rd button

then toggle with the stick

do you mean the 3rd button from left to right? and on the top or bottom?

thanks, ill give this a try :D

Hey guys, I tried the above advice but the third button did not do anything, it does not make a noise or anything. Also, from the photos I have seen of other peoples screens, mine is very different, it does not say nissan on it but has 'birdview' with all blue backgrounds and so on. There is only 1 screen that is the 4th button accross from the left on the top with any kind of info on it and it has only got a very basic compass and the rest of the info is these little graphs and so on.

Hey guys, I tried the above advice but the third button did not do anything, it does not make a noise or anything. Also, from the photos I have seen of other peoples screens, mine is very different, it does not say nissan on it but has 'birdview' with all blue backgrounds and so on. There is only 1 screen that is the 4th button accross from the left on the top with any kind of info on it and it has only got a very basic compass and the rest of the info is these little graphs and so on.

Ooops, my error :)

When I jumped in the car last night, I noticed that it IS the 4th button across that you will need to hit.

The leaf is then the top right option.

Sorry about that Cam.

That leaf is pointless!! haha economy and m35.. does not go together

I guess you just have the wrong mods then! My fuel economy is through the roof on a standard tune.

Travelled 136kms last night... mostly freeway (ahem, tollway), but with some main road and residential in there too. Averaged 94kph according to the trip computer and 13.9km/L.

Which works out at 7.2L/100kms. :):):)

Will be putting up a post, with pics regarding this mod very soon.

Edited by iamhe77
I guess you just have the wrong mods then! My fuel economy is through the roof on a standard tune.

Travelled 136kms last night... mostly freeway (ahem, tollway), but with some main road and residential in there too. Averaged 94kph according to the trip computer and 13.9km/L.

Which works out at 7.2L/100kms. :):):)

Will be putting up a post, with pics regarding this mod very soon.

Cam, you ought to put and exhaust gas temperature probe in your exhaust to make sure you do not lean out tooooo much.

I am looking forward to seeing the details of your mod.

Edited by andy65b
Cam, you ought to put and exhaust gas temperature probe in your exhaust to make sure you do not lean out tooooo much.

I am looking forward to seeing the details of your mod.

I will soon enough (I hope).

It is only when cruising that the economy is fantastic. When the engine is under load (accelerating) it actually uses more fuel than normal.

Think of it like a 1.5x (example) modifier... 1.5x fuel use when accelerating. 1.5x less fuel used when cruising.

Oh, and the throttle is a fair it more sensitive as well.

I will soon enough (I hope).

It is only when cruising that the economy is fantastic. When the engine is under load (accelerating) it actually uses more fuel than normal.

Think of it like a 1.5x (example) modifier... 1.5x fuel use when accelerating. 1.5x less fuel used when cruising.

Oh, and the throttle is a fair it more sensitive as well.

...the room goes quiet while we all wait with baited breath to hear about this new mod...

7.2L/100km. Thats DAMN good for any car!!

you serious?!

I realise you have a larger turbo and exhaust, both which will help...but even so, I had both of these (+tuning) on my previous stagea and even then it couldn't crack the 10L/100km mark on the highway.

Best I've seen from the M35 is 9.5L/100km and that was 100% highway, no A/C, constant 100km/h in 5th gear.

...the room goes quiet while we all wait with baited breath to hear about this new mod...

7.2L/100km. Thats DAMN good for any car!!

you serious?!

I realise you have a larger turbo and exhaust, both which will help...but even so, I had both of these (+tuning) on my previous stagea and even then it couldn't crack the 10L/100km mark on the highway.

Best I've seen from the M35 is 9.5L/100km and that was 100% highway, no A/C, constant 100km/h in 5th gear.

Very serious... actually scale that down to "quite serious". I don't like getting "very serious".

I don't have a dump done yet, so I don't know if that will aid or diminish economy.

Didn't have the A/C on, but I did have the climate control on if that makes any difference. (18 in cabin, 13 outside)

far out thats good, i can get 7.5L from the fiat on a bad run tho :(

Fanboy.

Maybe you should give your wife the Stag and just get around in your little Fiat :bunny:

Edited by iamhe77
I will soon enough (I hope).

It is only when cruising that the economy is fantastic. When the engine is under load (accelerating) it actually uses more fuel than normal.

Think of it like a 1.5x (example) modifier... 1.5x fuel use when accelerating. 1.5x less fuel used when cruising.

Oh, and the throttle is a fair it more sensitive as well.

i was getting 700 out of a tank to and from the snow..

so it doesnt sound like its going to help me all that much, whats needed is less fuel everywhere else on the map..

400-500km around town, i do drive rather quickly tho. tho its yet to bother me really

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...