Jump to content
SAU Community

Recommended Posts

Some purist says, R33 is the best in term of power and ride & handling outshine its other sibling. I read in few mags confirming the R33 as the best Skyline with RB engine ever. R32 was perhaps the one that changed the perception of Japanese Sport car through out the world, R33 polished and enhanced it to next level. R34 was said to be too heavy, too tech savvy and being call Play Station Generation's car.

In Malaysia, R33 is very2 less respected and 'ashamed' compared with R32 or R34 due to the similarity in its design with Perdana wannabe Skyliner.

R31 is almost unheard before as it was marketed for Japanese market only. I've been told R31 is a respected beast till today in Japan as it conquered Japan domestic races and underground races during its heyday.

:)

This really just comes down to personal preference.

R32 GTR claimed its name in bathurst back in the day and still till this day seems to break records against its youngest brother the R35 GTR

I prefer the interior of the r33 and r34 over the r32.

I would buy a R34 GTR over my 32 GTR anyday but I cant afford too :)

so yeh i think each one has its pros and cons.

no car is ever perfect

my 2cents

  • Like 1
This really just comes down to personal preference.

R32 GTR claimed its name in bathurst back in the day and still till this day seems to break records against its youngest brother the R35 GTR

I prefer the interior of the r33 and r34 over the r32.

I would buy a R34 GTR over my 32 GTR anyday but I cant afford too :)

so yeh i think each one has its pros and cons.

no car is ever perfect

my 2cents

R32 & R33 the best car.?

Best on a budget. I think you'd be hard pressed to find many peoplw who'd say that a 33 or 32 would be better than a 34, but you'd also be hard pressed to find anyone who can afford a 34, since they cost 50K AUD or so.

ah so itsa GTR's only being talked about here? Makes a bit more sense then i guess.

I'd agree with Sarumatix's quote although do not know much about the r31 the descriptions of the 32/33 and 34 seem pretty spot on to me

Some purist says, R33 is the best in term of power and ride & handling outshine its other sibling.

:)

I read in few mags confirming the R33 as the best Skyline with RB engine ever.

:)

They have the same engine, with more torque as each new model came out.

R32 was perhaps the one that changed the perception of Japanese Sport car through out the world, R33 polished and enhanced it to next level.

The R32 and R33 GTR have the same engine.

Was probably tuned to have a bit more torque but that's about it.

R34 was said to be too heavy, too tech savvy and being call Play Station Generation's car.

Any car with a MFD, ppl say it's to savvy.

Playstation Generation cuz all the kids who play Need 4 Speed Underground, don't have the chance to drive a real R34 GTR, they praise it in the video game like crazy.

In Malaysia, R33 is very2 less respected and 'ashamed' compared with R32 or R34 due to the similarity in its design with Perdana wannabe Skyliner.

R32 and R34 GTR's look better.

R31 is almost unheard before as it was marketed for Japanese market only. I've been told R31 is a respected beast till today in Japan as it conquered Japan domestic races and underground races during its heyday.

Dispite it's 'grandpa' styling, it took the Skyline 1 step closer to the GTR's.

post-46584-1263779375_thumb.jpg

For GTRs my personal opinion is the R34. Nissan studied what they did wrong with the R33 (too heavy, less GTR appeal) and tried to make a car that was closer to the R32. Remember at the time the NSX was out and was technically a superior car to the R32 and R33. Nissan had to come out with something better and the R34 was the end result.

Next is the R32. It just looks better than the R33, lighter and tossier. The muscular lines is what started the GTR appeal in my opinion, the R33 had less of it which looked more like a Falcon or Telstar. The R34 took aggresive styling to another level.

I have less knowledge of the R31. I watched them raced in Group A racing in Australia with George Fury at the wheel and enjoyed watching the blue/white/red cars take on the locals (which they did very well). I think that was when I became a fan. When Godzilla came it was like the missing link of Australian motoring. That was how significant the R32 was.

It seems that I'm not a fan of the R33 because of the styling. I think dark colours like black or midnight purple with offset rims suits them best.

HR31 feels antiquated to drive IMO especially compared to the R32, also feels like you're sitting on the passenger's lap since it is quite squeezy inside.

Depends otherwise on whether you're comparing GT-R or not, R32 w/RB25 is the ultimate Skyline IMO

I have had a 32 and a 34 gtr and both were brilliant, the 34 certainly had a much nicer interior.

I struggle to be engaged by the 33! I am surprised that any purist would pick this vehicle as their

weapon of choice. Especially with models like the 34N1, nur, or aus delivered 32 in the mix.

Aren't we glad that it's the NISSAN MOTOR Co. that conceived > designed > R&D'd > manufactured all of the above?

I know I am!

I think somehow, that Carlos Ghosn has been!

:domokun:

:rofl2:

They have the same engine, with more torque as each new model came out.

The R32 and R33 GTR have the same engine.

Was probably tuned to have a bit more torque but that's about it.

I thought Nissan revised a few of the ancillaries with each revision of the GTR.

One that springs to mind is the bearing to the oil pump, if i recall correctly, the bearing (or something) is too small on the 32 and is prone to screwing up and causing oil supply issues.

That said was a while ago that i read that... so i could be wrong.

I thought Nissan revised a few of the ancillaries with each revision of the GTR.

One that springs to mind is the bearing to the oil pump, if i recall correctly, the bearing (or something) is too small on the 32 and is prone to screwing up and causing oil supply issues.

That said was a while ago that i read that... so i could be wrong.

Yes, I too have read about that.

The R32's weak oil pump drive collar, which tended to fail in higher power applications.

So when highly modifying a R32 GTR, that will need attention to.

For stock, light and mid modifications, it is fine.

It was fixed in the R33 GTR, with a wider collar.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...