Jump to content
SAU Community

Recommended Posts

Why don't you just pop that little plastic piece out of the console and see where the wires go? You can just gently prise it out with a screwdriver.

Or, you could just yank really hard on the wires, and see if something suddenly stops working :D

have you seen it before west? ive tried pressing it down one a time but not both together and nothing seems to happen? ill try running the wires and see where it goes. car was mildy modded so im sure it definitely does something...?

have you seen it before west? ive tried pressing it down one a time but not both together and nothing seems to happen? ill try running the wires and see where it goes. car was mildy modded so im sure it definitely does something...?

No i haven't seen it before but the only way to find out is like what everyone else have said, remove the whole arm rest thing and find out. It could be the dash light dimmer control thing too or offcourse it'll be a bonus if it really is the Attessa controler.

Idea 'C'...

Japanese booklet in glove box says...

Instruction #1. Drill 2X holes into the centre console within close reach of the driver and fit the 2X terminals.

#2 Wire up 1 terminal to the battery + the other to a detonator next to fuel tank.

#3 Tops of terminals are to be wired to a R/C switch.

#4 Drive car to Greenpeace Save the Whale Commission at Osaka and park at the front...................

OR

#4a Take car to auction house where some Aussie will buy it and................

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...