Jump to content
SAU Community

Recommended Posts

nope. why would it?

all it does is recirculate excessive built up pressure when you close the throttle body to prevent compressor surge.

there is no perfomance gains to be had from having a given type of blow off valve or recirculation valve.

the aftermarket ones are usually ass and either make the car run like ass or make silly noises.

nope. why would it?

all it does is recirculate excessive built up pressure when you close the throttle body to prevent compressor surge.

there is no perfomance gains to be had from having a given type of blow off valve or recirculation valve.

the aftermarket ones are usually ass and either make the car run like ass or make silly noises.

OK cool i just thought the aftermarket ones release more pressure then the normal ones becasue they can be bigger which means they clear out more of the pressure built up

no the standard ones are fine, please do not change them, aftermarket bov's are pointless and no gain

i suggest doing some reading of the upgrade threads to avoid wasting $ on pointless changes / upgrades etc

^ No. Aftermarket ones seal on idle - which is BAD.

stock gtr ones are fully open at idle... wich is why they need to be plumbed back if using air flow meters.

i tryed two wanker hks ssq's, absolutly shit compared to stock. massive delay and nowhere near as much flow.

in a perfect world the bocv would have such a light spring that its just enough to seat the valve and hold no more than 3 or 4 pound. dont forget its the boost pressure acting on the opposite side of the valve that seals it not the spring tension.

so in reality a proper poppet style bov with a rubberised seat (stock gtr) can never leak boost. ever. so long as the bov has got the same boost acting on its diaphram as it got in the pipe it sits in.

Here's a handy one for a track car: If you run MAP-sensored load metering, you can get rid of the recirc' setup on OE GT-R and have them vent to atmosphere, and K&N happen to make some of those little 'breather filters' that have exactly the same ID circumference as the OD of the factory GT-R bov outlet ports :D (you'll need the filters so you don't suck crap into the engine while running in manifold vacuum)

Pro tip. Fully hektic PSSSCHTTTTTT!!!! noise, if you like that kinda thing...

im 99% sure if u run pods u can here the stock BOV alot louder. but hey.... i dont no cause i got stock BOV and a stock Airbox. i cant hear anything, every now and than when driving next to a concrete wall on the freeway or somthing other than that, my engine bay looks factory, and my car is quite as...... till i cut her loose that is... than Kaki regu starts making some noise. haha

Edited by Deano 1
having them leak @ idle/low RPM eliminates compressor surge when using larger turbos.

same as the factory piping. It was all designed that way for a reason.

Doesn't comp surge occur when the turbo is making positive pressure in which case the stock bov will be closed anyway?

For what its worth i had a greddy recirculating valve which was shut on idle on my 25 and had no probs with idle,stalling when stopping etc etc.

im 99% sure if u run pods u can here the stock BOV alot louder. but hey.... i dont no cause i got stock BOV and a stock Airbox. i cant hear anything, every now and than when driving next to a concrete wall on the freeway or somthing other than that, my engine bay looks factory, and my car is quite as...... till i cut her loose that is... than Kaki regu starts making some noise. haha

There's a sorta 'baffle' thing in the stock airbox that you can remove that will make the stock BOV much louder if you remove it - if you like that sort of thing.

R31Nismoid is correct. Most stock blowoff valves have a small bypass hole about 5mm in diameter to stop the low throttle surge, I have blocked mine thinking it would be ok but there is the odd flutter when on boost at low revs and throttle opening.

Stock GTR BOV can handle above 300kW's.

Aftermarket BOV's have no gain.

Only reason to change if you are running a ridiculously high amount of boost and the stock BOV cannot handle it any more.

Doesn't comp surge occur when the turbo is making positive pressure in which case the stock bov will be closed anyway?

For what its worth i had a greddy recirculating valve which was shut on idle on my 25 and had no probs with idle,stalling when stopping etc etc.

Comp surge can occur anywhere on a compressor's map.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...