Jump to content
SAU Community

Recommended Posts

hey i was looking for a professional shop to install my mongoose m80 car alarm im located in the liverpool area does anyone know any good and cheap shops ? willing to travel for good priced shops

do a search....

this guy is damn good and will come to you

http://www.skylinesaustralia.com/forums/Al...l&hl=daniel

cheers

hmm wont be getting the m80 anymore probaly look for something else its too expensive to get and install got qutoed $680

any other alarm recommendations i was thinking of a gps tracking one lol

Edited by Tenkin

you would pay around that for somethng decent and insurance approved.

ebay is your mate if you are looking for a gps system that is cheap but you would still pay for installation.

just make sure you ask your insurance first to see if the installer has to fill in a certificate of installation first with a valid installelers number.

I paid big money for mine and the ass that installed it won't sign anything incase the car gets stollen and they bypass the alarm and he is held liable....

just do your research first

Another Leon fan boy here.

He's done my last two cars, and is awesome to deal with.

Come's to you, reasonable price, and is happy to talk you through what he's doing and why.

What's great as well is the care he takes with dismantling the trim and then putting the car back together again.

  • 2 weeks later...
  • 3 years later...

Hi Guys,


Yes we are one of the best car alarm installers going around. Carbon Car Systems (previously Platinum) have over 15 years experience and specialise in stealth car security installations and offer a wide range of security products.


We are even one of the only stores in Australia to have alarm demo boards in store where you can come down and try working car alarms and see the features and what they do!!! We have 8x Alarms on Working displays!

Feel free to contact us any time for information or quotes :D


http://www.carboncarsystems.com.au/contacts/

ccc137.jpg

Daniel from Platinum did mine and was a top bloke and good prices. Check him out (found him on NS site).

Daniel quoted me a price for security supply & installation.

During the instal, Daniel realised that an extra part needed to be procured - one that he didn't have.

After he came back half an hour later, he completed the instal.

I had to remind Daniel that he needed to add the cost of the said, extra part.

He said that he would have nothing of it & would stick to the original quote.

He apologised for the inconvenience of the extra half hour.

It doesn't get any better than this!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...