Jump to content
SAU Community

Recommended Posts

Lol, its not really something to envy, with practise anyone can draw/colour as good as anyone else IMO. Plus it's not like I just started out of nowhere :thumbsup: I've been drawing for yearrrsss.

and to top it off;

flush enough for you?

no

32 on the left needs wider wheels up front, but I'm guessing he's running spacers on the back wheels to get "flush", but doesn't run them on the front because it scrubs on the guard which he cbf sorting out properly. Being a GTR driver he probably got the same width and offset front n back, without taking the extra 5 mins to do the math to get a staggered fitment or different offsets on the same widths with the same overall rolling diameter.

32 on the right needs to man up and run wider wheels all around. And roll that guard lip before it shreds his tyres.

Critique this one Shan...

no critiquing necessary... that's good fitment. Coulda gone with a nicer kit, but meh, its a 300zx, only good things on them are the AFM, throttle body, brakes and manual gearbox, so its kinda like polishing a turd when it comes to aesthetics.

That said, it is the outside facing side of a bend, which means he's running almost "krzysiu spec" suspension making it lean on the corner. post up a pic of it standing still and you'll see it needs more low.

QLD guys are usually on point when it comes to fitment and stance.

notice a trend with the cars from the US and europe? focus is on stance, and keep it simple. no big shitty over the top kits and paintjobs.

need some tips for this. i wanna go lower but not sure if there is a point

well decide if you wanna put up with sump bashing, lower control arm collecting, manhole cover/cat's eyes scraping etc, attention from cops and so on, then dump it on its guts. scraping is fixed by relocating cables, flaring fenders and bending inner guards and proper wheel/tyre choice.

stance, function, practicality. pick one.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...