Jump to content
SAU Community

Recommended Posts

don't BC's come with 7kg and 4kg springs standard? From memory that's around the same rebound rate as stock. Performance gain? Turn the dampening off full firm and see how the bounce rate is. The midrange of most cheap coils are terrible, they only work properly at either extreme due to the nature of their valving. Add to this that BC's don't have progressive springs, and it's pretty much a recipe for fail.

With the same amount of money you could get a very good set of matched springs and struts that will last longer, perform consistently and much more smoothly. Fuck adjustable dampening and height, the only guys who do that usually have $5000 suspensions and visit a suspension shop before and after each event. If someone's on a $1200 budget for suspension their broke ass isn't gonna see a suspension shop after it's been set. ever. they'll just ghetto it up at home every time they get defected.

With the same amount of money you could get a very good set of matched springs and struts that will last longer, perform consistently and much more smoothly.

in which case you'd rag on him for not dragging his balls low enough on the ground (or whatever analogy it is you like to use)

so what's a kid to do?

save up and buy decent coils so he can do both?

not that he'd ever drag his balls too low to the ground, he'd destroy that fibreglass kit of his at the sight of a bump in the road... so he'll be running it at a safe and possibly legal height, so why bother with cheap coilovers?

All i know is my BCs feel good :) and heard good things from suspension specialists, and the reason why my car isn't balls slammed to the floor is becuase of:

1. The area I live in.

2. My dad spent a fair bit of time repairing my front lip while I was doing other things, and would hate to screw up his hard work of repairing it properly

BC coilovers are actually pretty good shan, they are pretty much rebadged greddy's. Spring rates 8 / 4
pigs arse, we've fitted about 3 sets on cars, and they were almost identical to the other equivalent stuff from race logic and G4/D2. Just powdercoated a different colour. Shit we even showed the race logic guy who looked after our trade account and he was like "ummm yeahhhh funny that".

8/4? you had better spring rates when you were rockin superior stock suspension for acceleration.

running 10/8 on the GTS4 on matched Tanabe springs and shocks. Is nice. Bumpy, but not as bad as my old 12/10 setup which was bumpy as fuck, but it's not a daily so I don't really give a toss... and if the passengers don't like it... they can GTFO and walk.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...