Jump to content
SAU Community

Recommended Posts

lol unless its a friday forget it i work every day lols.

needa swap back to my stock front guards better fitment but doin it after winton

You just want full bad as poke for your wheels yeah...

Haha!

So much easier to work on an EVO engine then a RB cuz there is so much room.

+ Your oil filter is easier to get to.

But having said that, if you know what your doing, you can get around it in the RB.

both engines have there advantages/disadvantages

although service on the evo piece of piss compared to the 32 even with the hicas pump removed

oil filter is a max 2min job, its arms reach underneath the car

Say whaa, nuh this one is in werribee

And says your choice or a Lancer Evolution 7 or a Subaru WRX

mmmm is it like rallyschool.com.au? or something

there was a guy advertising on evo forums for it once

yeh basically just dropping the lower seat lower (in my case winding it down), would have got me lower, but i would have ridden on the bump stops and given me no travel, this way ive done it has lowered the car, but has actually given me back my stroke, and complete control over it simply by adding in spacers to drop the bump stop to a point where it is bottoming out.

i actually dropped my car a while ago and after a certain point, winding down my coilovers didnt actually lower the car anymore, because the car was sitting on bump stops, not the coils lol. wasnt THAT low either.

haha nothing wrong riding on bump-stops :)

Will look into making some up! cheers for the help.

Went to watch my friend do the rally drive. He did a half day course and drove wrx's and evo's.

The trick to rallying is that you steer into the corner and accelerate as opposed to counter steering in drifting. So you pull the front of the car through the corner and the rear slides out. They'll explain it at the beginning.

So you gonna ban'em like what you did with Virgin Boy for the shit talk you cannot stand..?

:)

funny thing is i wasnt shit talking lmao

what does the E infront of HNR mean on the build plate. awd?

what does the E infront of HNR mean on the build plate. awd?

the first E stands for the emissions standard it complied to. All the early ones met that emissions standards (till 91 I think) got an E.

the rest:

http://www.skylinesaustralia.com/forums/R3...tio-t38809.html

The trick to rallying is that you steer into the corner and accelerate as opposed to counter steering in drifting. So you pull the front of the car through the corner and the rear slides out. They'll explain it at the beginning.

lol I think you'll find that's the difference in steering an AWD vs steering a RWD into a corner.

the first E stands for the emissions standard it complied to. All the early ones met that emissions standards (till 91 I think) got an E.

the rest:

http://www.skylinesaustralia.com/forums/R3...tio-t38809.html

lol I think you'll find that's the difference in steering an AWD vs steering a RWD into a corner.

yeah i know hence why i stated it. Not everyone realises the obvious esp when never driven an awd car before.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...