Jump to content
SAU Community

Recommended Posts

Lol leigh starcraft is better than your favourite nerd game, WOW LOL :(

Pretty sure wow is more popular.. and i only just started playing again yesterday :( even then I only play when I'm bored and cant go out dont raid 24/7 like most people..

Go download more porn mate and get capped :D

did you have your cap sideways and flat? and then hold your hand up and sideways in an E shape?

i dont wear caps

do you even have a license to drive?

no, had my l's up and my mum in the passenger seat. its all the rage these days

It was the cheapest GenIII MR2 I could find. So yeah I'm trying to save money where I can. I just want the kit on and the rust removed. It's not really a hard job. DT's did a great job on my old MR2. I seriously couldn't fault it.

It doesn't need to be perfect. It's had a SHIT respray already. Like overspray in the wheel wells and stuff haha

Vu did a great job on athid's car, (athid does vu's more difficult flaring jobs, so they is pretty tight) so it is possible to get a good job from there, but ya gots ta be connected yo :(

car is all back to stock :( Feels weird, am still used to the old power curve haha

retuned to handle the injectors but need to replace the board with an eprom chip now..

Shan, any chance you got a PIC programmer? If i give you a chip and a .bin file, would you be able to load it on?

Gonna do the trackday with all stock parts on the 16th, then put them back on for next track day. It will be like playing GT5 but in real life! haha

looks like a strange mashup between an audemars piguet royal oak survivor

audemars-piguet-royal-oak-offshore-rubens-barrichello-ii-watch-2.jpg

and a hublot big bang

hublot_1.jpg

with a quartz movement lol.

don't wear that watch around people who may own either of those originals.

yeah I'm just sayin the meister ambassador seems very "borrowed" from the two originals I posted before.

They're the Rotas of the watch world. Very slightly original yet very similar to an exxy brand, but just as functional :laugh:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...