Jump to content
SAU Community

Recommended Posts

18's don't look big on an R32, they look normal. dunno if you noticed, but an R32 sedan is a panzer tank compared to most sports cars.

if you're gonna piddle in faggotry by sticking to stock nissan wheels, you might as well go balls out and get the best stockies you can buy.

also...

fixed.

are you implying that an r32 sedan is in some way a sports car?

if so please leave.

they'll all work, they just look different. electrically identical. GTS4 is different to GTSt, and both are different to GTR though, so Mohsen's dodgy cluster won't work on yours.

Panzer tank lmao

Hmmmm... Suggestions on 18s then oh wheel master?

sell car, buy chromies, put on excel, embrace your inner habib.

are you implying that an r32 sedan is in some way a sports car?

no. compared to.

they'll all work, they just look different. electrically identical. GTS4 is different to GTSt, and both are different to GTR though, so Mohsen's dodgy cluster won't work on yours.

Of course not.

So I'd better off buying 300+ Km/h cluster blindly and see what happens...

they'll all work, they just look different. electrically identical. GTS4 is different to GTSt, and both are different to GTR though, so Mohsen's rejuvenated cluster won't work on yours.

sell car, buy chromies, put on excel, embrace your inner habib.

no. compared to.

laugh.gif dodgy is a strong word..

im off to oakleigh soon, wish me luck

Edited by Mohsen

congrats moe

i recon i'd fail my p's hard if i had to resit....

i cant drive a car with a stock clutch worth shit anymore... the other day i had to move this chicks suzuki alto (1.0 three-cylinder 50kW 900kg P.O.S.) and i stalled it instantly... i nearly kicked a hole in the firewall when i pressed the clutch pedal and when i hit the breaks i nearly went through the windscreen :/

i'd probably have to sit the test in a skyline and get failed on principle ;)

good work

did you get a new photo on your p's

ive managed to keep all my licence photos

leaners

p's

full licence

full licence

its ace

thanks guys

yeah kept my L's

full muz cut and shit haha

unfortunatly, i have decided to sell the R32 :(

3 demerit points is a big deterrent, at least i can make some money on it and get something newer ;)

I couldnt find any 180sx n/as, whats with the sudden n/a urge? starting to realize we were right? :P

Oh and Hamish I did my test in my old 33, and the bitch was pretty big and could hardly get in -_- passed none the less!

Cass what size are the new rims your getting?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...