Jump to content
SAU Community

Recommended Posts

Think there's a subtle difference in the skirts themselves as well, think it was something like more of a curve or indent in the actual skirt towards the middle, probably to accommodate for the difference at each end due to the guards...

I think I've seen people do it, but there was probably some work involved

F<------------------------------------------------------------------>R

166cm

<--------->

26.5

approx

mmsed you 3 photos alex let me know if you get them, looking closely at it the guards do go out pretty wide which is why its in 2 pieces from the looks of things

Anyone who's after a sick electronic boost controller (Turbosmart e-boost street) should consider buying mine.

Only $350.

http://www.skylinesaustralia.com/forums/topic/352443-turbosmart-e-boost-street-ebc/

Selling due to sale of car : (

yeh you'd think it would be easy to find em in white but i cant, so yeh was just an idea IF they fitted from the pics leigh sent it seems do able but not worth the effort its only side skirts anyway.

if you'ze see some in any colour stock hit me up do want. asap.

I don't wanna pay $300+ for that seat because I know they were $200 each not long ago haha.

Thinking about maybe a Velo or OMP fixed back... Around the $500-600 mark. Thoughts?

velo GP90 in black

that's what i'm going when i CBF spending the $$$, and the bride seat in the link is exactly what I am running at the moment, it's decent and would be easy to resell if you want a mint seat later... rails will set you back like ~$100 secondhand from j-imports and he usually has them in stock. fwiw it sits a good inch lower than GTR seat on superlow rails

looks like a fish tank

buy it and you can do whatever you want with it

sitting low is where it's at...when i took my seats out and put stockies back in to sell, felt like SHIT. felt like sitting ON the car rather than in it, and it was surprisingly un nerving taking a corner at any kind of speed in the stock seat as opposed to in the low, supportive aftermarkets I had

sweet, black?

hamish & dez- oic

i was sliding all over the stock 32 seats when i was fanging it through corners.. lower driving position= reduced center of gravity = driver being stable at speed?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...