Jump to content
SAU Community

Recommended Posts

need an answer to this quick:

Took my car to Beaurepairs to get my front wheels balanced! they finished and when I went out the guy tells me that one of my $250 kics nuts has been threaded and same as the stud on the spacer. Is there anything I can do? He told me they were hard to get off so he had to get them off by hand and it was f**ked already....

do NOT accept this.

look for signs of scratching on the nuts and see if they used the gun and then call head office and complain

tell them you EXPLICITLY directed them not to use a rattle the gun and they did due to nothing but laziness.

you want a new set of kics nuts or the $350 (retail) to replace them. also a new stud or spacershould be paid for

just go HARD

annoying knocking noise coming from one of the rear coilovers what does that mean? no leaks as far as i can see...

chek your bushes? Mine made knocking noises from the front due to worn rosejointed bushes

annoying knocking noise coming from one of the rear coilovers what does that mean? no leaks as far as i can see...

Give the tops and crack with a spanner.

Do you have a rear strut bar? That could have come loose.

Wheel nuts..

chek your bushes? Mine made knocking noises from the front due to worn rosejointed bushes

hmmmz

Give the tops and crack with a spanner.

Do you have a rear strut bar? That could have come loose.

Wheel nuts..

you mean tighten the tops? they are..

no rear strut bar

wheel nuts are fine

old coilovers were a bit noisy but that was coz i had removed the helper springs and compressed the springs. these HKS ones are louder

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...