Jump to content
SAU Community

Recommended Posts

yeah mate here is the link the pics are shit compared to seeing and hearing this thing in person.

http://www.carsales....20903&silo=1011

is this place somewhere near ringwood?

some exhaust place? i remember seeing it when i went to do my epa noise test, but it might be a different car, just curious.

Definitely wasn't a cockfest in there. So much talent!

I reckon bring less cocks next time though. Group of 3 ftw. 5+ is a bit much.

Less does make it easier if the goal is to try and pickup teh ladies.

the place is in south melbourne. yeah i took it for a spin drives very nice.

i dunno 'birds' these guys said they havnt had this car for long but they get there cars from some bmw dealers so it might have been advertised elsewhere.

Maybe they had another silver M3 a while ago and I'm confusing it with this one? Or it could have been a 330CI, because at the time I was checking out M3s and 330s. I definitely recognise the place in the background, so it's either the same car or just the same place.

that's way too much for a SMG with almost 100Ks...

there was a black manual one on carsales also had 100Ks on it was only asking 42K or so for it. don't pay any more than 45K for a e46 m3 unless it's less than 70K and manual.

Maybe they had another silver M3 a while ago and I'm confusing it with this one? Or it could have been a 330CI, because at the time I was checking out M3s and 330s. I definitely recognise the place in the background, so it's either the same car or just the same place.

Most of their pictures are taken in the same spot. Most likely confusing it with something else. Because my mates one, in the add, was parked in the exact same spot, it was a silver 320ci.

that's way too much for a SMG with almost 100Ks...

there was a black manual one on carsales also had 100Ks on it was only asking 42K or so for it. don't pay any more than 45K for a e46 m3 unless it's less than 70K and manual.

yeah it was way too much and with on road costs it would come to 51k. most of them ive seen have very high kays and are still asking alot of money for them.

Billy - got a few quotes for full tune.

Racepace said 800-900

And Trent said 750 ( extra 100 for gtr cos of the front drive shaft) and his going to keep it a couple of days so he can do cold start tune as well.

So yeah booked in :D

Billy - got a few quotes for full tune.

Racepace said 800-900

And Trent said 750 ( extra 100 for gtr cos of the front drive shaft) and his going to keep it a couple of days so he can do cold start tune as well.

So yeah booked in :D

easy way to save yourself 100 dorra

drop your own front drive shaft XD

buy a silvia if you wanna go sideways. the suspension design is much better suited to it.

buy a GTR if you wanna go fast.

buy a GTSt if you're broke and wanna go fast.

:rofl2:

Yeah after running a 12.6 basically stock as a rock I'm sure my bro is kicking himself for putting money into his GTST

But meh, thats just drags circuit is fun as well :D

[/inb4 flame]

Also Scott what about a 370z?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...