Jump to content
SAU Community

Recommended Posts

I found one supplier on eBay US for around aud$80 delivered so a group buy should lesson the postage making them slightly cheaper again.

Dear Paul, as the expression goes: Shit or get off the pot.

To all those interested in a G35 cover: Since I am not making a red cent on these covers and was just tying to organise it to help out and cover Aus wide shipping costs, may I suggest you guys get in contact with Paul and organise your purchases through him since he can get them cheaper than I can from the US.

I am sure he will be more than willing to help out :thumbsup:

  • Replies 122
  • Created
  • Last Reply

Top Posters In This Topic

Dear Paul, as the expression goes: Shit or get off the pot

No need for that mate. You asked me to share the link so I thought I would make contact with the supplier I found for a GB price to save you the leg work. Then I was going to pass on the details to you.

I know it's your GB but if I could have shared cheaper pricing for everyone, it could have been a good thing. Don't know I'd bother next time!

Anyway, I just got a reply and they are out of stock and have them on back order with no eta.

Enjoy.

Edited by slippylotion

All due respect Paul, you haven't done anything other than jump into someone else's group buy thread touting that you found a supplier that can do it cheaper.

If you had found a supplier, why not post the link up or even better, instead of posting what you did - send it in a PM.

I'd still like to see this supplier that can do it for $80 landed. Feel free to post the link as you did say that you had found it for this price and I'm sure everyone interested would love to save the $10 and the wait for the numbers to enable the group buy.

Future reference, 1) when organising group buy, you work out the supply and pricing BEFORE posting anything 2) "going to" means that you didn't.

I guess it comes down to if you say that you can do it better/cheaper, do it or STFU and GTFO

Edited by iamhe77

All due respect Paul, you haven't done anything other than jump into someone else's group buy thread touting that you found a supplier that can do it cheaper.

If you had found a supplier, why not post the link up or even better, instead of posting what you did - send it in a PM.

I said the reasons I did this in my post! When Ryan did a GB on SPC bolts after I did, I shared that supplier with him in his thread. Seeing as SAU won't allow you to edit or delete a post after a short time I couldn't remove it.

I'd still like to see this supplier that can do it for $80 landed. Feel free to post the link as you did say that you had found it for this price and I'm sure everyone interested would love to save the $10 and the wait for the numbers to enable the group buy.

That price is a single item landed, not group buy price!

Future reference, 1) when organising group buy, you work out the supply and pricing BEFORE posting anything 2) "going to" means that you didn't.

I guess it comes down to if you say that you can do it better/cheaper, do it or STFU and GTFO

If I go to Melbourne we can meet and you can repeat the above to me!

Cam was asked to do this group buy wasn't he? Why would you essentially try and waste the hours of time he has put into this Paul, for the sake of a couple of dollars? Seems to be a common occurrence with you, just stop and think before you post or PM as not to upset people, he is just trying to help.

I am sure out of the thousands of dealers over in the states there would be one that will undercut the price a little, why don't you call them all...

Cam is most definitely the Technoviking, not to be messed with. lol.

I guess it comes down to if you say that you can do it better/cheaper, do it or STFU and GTFO

If I go to Melbourne we can meet and you can repeat the above to me!

HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAH

I Would pay to watch cameron kick the shit out of you hahhahahhahahahahahaha

100% wrong person to threaten buddy

edit:

hahahahahahahahahahahahahahahahahahahahaahahahhaahhahaha

1493350_o.gif

Edited by Sunkist

That price is a single item landed, not group buy price!

If I go to Melbourne we can meet and you can repeat the above to me!

Still haven't seen an ebay link to this seller Paul.

For the sake of all the guys that are interested in buying these covers and saving $12 over my price post it up so they can buy their own instead of waiting for the number of a group buy (no sarcasm).

For the third time, put up or shut up.

Oh, and lol.

This thread has made me think less of the Wastelanders.

Never before have I seen so few pics of women in a thread with so many wastelanders.

I only hope they can get things back on track.

Need 10 (although I'll check).

Have? Not 10 yet

what the heck happened to this thread? anyhow Im out as Im importing it myself now.

Sonny, who did you get it through? If it was cheaper than I can do, can you post up the link/seller for the others that are interested (serious).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...