Jump to content
SAU Community

Recommended Posts

I don't think it's a case of how long it will last, moreso how it will break. We pulled the head off on the weekend, pistons were absolutely mint, no detonation marks at all.

We're thinking it will be conrod or gudgeon pin related when it fails. Either way we're looking forward to seeing how.

It is our development car, and we have a BC 2.2L bottom end assembled ready to go when it goes boom!

As mentioned previously, we will offer free tuning to a donor RB25DET owner wanting to put one on a 5557 purchased from us. Don't be shy guys :verymad: If we had an RB25 as one of our project cars it would be on it!

Other side of Australia so no chance of that haha

What are the housing sizes on these things like, I assume you would need a spacer to bolt onto a standard RB25 manifold?

I tried (not to that extent) with my 3037S with a 1.12 a/r rear. It made 376kW on 25psi on my SR, we didn't got further as the boost line started to fall. I think that all I would have been doing is overspooling it.

I don't think it's a case of how long it will last, moreso how it will break. We pulled the head off on the weekend, pistons were absolutely mint, no detonation marks at all.

We're thinking it will be conrod or gudgeon pin related when it fails. Either way we're looking forward to seeing how.

It is our development car, and we have a BC 2.2L bottom end assembled ready to go when it goes boom!

Very interested to see the mode of failure when it does go, could you post a thread up for all of us to see if (when) it does fail?

As mentioned previously, we will offer free tuning to a donor RB25DET owner wanting to put one on a 5557 purchased from us. Don't be shy guys :) If we had an RB25 as one of our project cars it would be on it!

Wow, good offer kemp, someone should take up on this offer :D

  • 2 weeks later...

Just to let you know guys, we are now offering the 62 and 67 range with divided split pulse T4 housings. This is something new from Precision, I'm sure it will make it a lot more attractive for some of you with twin scroll setups! We have .84 in stock and are able to offer 1.00 and .70

  • 2 weeks later...

We supply the whole billet range from the 5557 to 6765 comes with a 0.70 a/r comp cover, however we can special order the non ported covers which have a 2.8" intake, as far as I'm aware they are a 0.60a/r front, similar to a 3076R in size.

  • 2 weeks later...

Well after some Friday arvo beers I managed to Gee the boss up pretty hard, basically I stressed that there was no point in us going out to get kicked off for a mid 10, let's try to run a 9....

So, I came back around 30 seconds later with a 6262SP in hand and it didn't take much convincing. Friday was a party here at Powertune, music cranking, cashews, chips, and within a very short time the turbo was on and the Red Dragon was getting reversed onto the rollers.

Had a solid 5 passes on the dyno, but we knew the 6262 needed a bit more boost to get it in the zone, though 45psi didn't agree with something in the engine! It filled number 2 and 3 with water so we're thinking it's either lifted the head again or cracked the block around a water jacket.

Anyway, I've rocked up here this morning and the engine is out, and 2.2L stroker in ready to go, in fact they're finish up the install of the built engine now with the 6262SP on. Get ready for round 2 :)

ncsd5.jpg

We were getting frustrated with it living :)

The other passes were on a lower boost setting

Well it copped the initial load, then unleashed the tyres with 3 of us in the back which it has never done, it did hold 45psi flat though.

It would have definitely been over 430kW, I'd say 450kW at a guess. Sadly we'll never know!

Will keep you updated when we crack it open to find out the truth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...