Jump to content
SAU Community

Recommended Posts

Yeah Twin scroll. It feels fairly towy atm with it just running off the gate at 14psi. Will be very interesting to see how it compares with the old HKS T04Z. As for the tune just have to wait & see when mark has the time to come down. Hopefully within the next few weeks.

Pulled 604Hp at all 4 with T04Z on 24 psi So yeah Cant wait to see, Noticed the precision turbo is very Quiet which is a good thing I reckons.

Quiete??? Ours spool like a jet fighter. Love it

Is the PT6766 any laggier than the T04Z? Surprised its not very rowdy, the GT3794R-HTAs (basically the PT6766s closest match) seem to scream.

Please post results up when its done, will be very interesting :)

Quiete??? Ours spool like a jet fighter. Love it

Yeah ya right it has that jet sound about it. But at 14 psi isnt much for that turbo at 35psi well me thinks it might suck a jet out of the sky or kill afew miner birds. lol. Should sound awesome

Will post up results once tuned Looking foward to it.

what happened?

Nothing major man, just a few little dramas like collapsed coilovers, BOV blown clean off the pipe and a gut full of stale E85 which makes it no go at the moment..... Other than that its awesome!

Did u get ur ethanol sensor working again? We have already had 1 die. Lucky i had a spare fir my car. Warranty phone call will be made today for a replacement

Will let you know once its got decent fuel etc again.... should be OK but i did get an E100 reading and also an Esen a few times....

Nothing major man, just a few little dramas like collapsed coilovers, BOV blown clean off the pipe and a gut full of stale E85 which makes it no go at the moment..... Other than that its awesome!

Sounds rough, howd you manage to blow the bov off the pipe? Do you mean the return pipe blew off, or that it actually blew the welded flange for the bov on your cooler piping?

If its the latter, wow...

Stale e85???

Yep, my fault man! Storage issue!

Sounds rough, howd you manage to blow the bov off the pipe? Do you mean the return pipe blew off, or that it actually blew the welded flange for the bov on your cooler piping?

If its the latter, wow...

Off the pipe as the idiot up here that did my pipiing didnt put a bead for the clamp to grab on and also overtightened the clamp, ive probably had a slight leak the whole time... Temporary fix -

post-47580-0-79755400-1342582785_thumb.jpg

:laugh:

You've had a eth content sensor fail? What type, and what were the symptoms?

I dont think mine is failing, however it did do the same thing as Kurtis's so ill be keeping an eye on it.... Got an E100 reading randomly and also Esen (i think thats what it said anyway)....

watch 600hp turn into 600kw like Lith said, LOL.

it is tuned for what your doing atm yeah? not boosting it on the T04Z tune are you?

when you say toey do you mean its pretty lively under the foot? responsive for the amount of power it will make?

Yeah have driven it home off the gate have boosted it on to4z tune Mark said it would be okay, Until we do the full tune. Felt lively with just 1bar under foot quick spirt in second had good pull. But its in the shed awaiting for the tune day, 600kw Ya reckons guys I wont know what hit me.

Hope

Just hope the rest of your setup is up to the task LOL!

Hope so should be okay have ppg dog set in gearbox. 2000cc injectors to go in. Only thing that is a bit worrying is the spark & the twin walbros in the tank been fine thus far. But it pays to have vital gauges in the cockpit fuel pressure & oil pressure.

I dont understand why some turbo cars eg R34GTT came with the stupid useless battery voltage gauge and the boost gauge which isnt accurate( and generally replaced when modded anyway). The most important gauge, the AFR gauge could have taken their place.

I dont understand why some turbo cars eg R34GTT came with the stupid useless battery voltage gauge and the boost gauge which isnt accurate( and generally replaced when modded anyway). The most important gauge, the AFR gauge could have taken their place.

There's a lot of things you don't seem to understand.

These weren't intended as fkn race cars dude. Why would your average driver need an AFR gauge? Battery voltage is much more useful. As for the boost gauge being inaccurate, they are almost 15 years old now, of course they are inaccurate. AFR is far from the most important gauge, in fact I'd say they are completely unnecessary unless you are planning on doing your own tuning or tracking the car.

Edited by Hanaldo

And how is the battery voltage useful, explain? As most cars, like the vast majority dont come with one.

It's not overly useful, it's just more useful than an AFR gauge to most people.

Gauges are really just about learning the 'norm' for your car. So if you're like me and you constantly watch your gauges, you know what is normal and what is not. If your alternator starts to die or your volt load changes, you'll notice it and possibly avoid getting stuck. Can also be useful for determining the load on your alternator, ie. watch how far it dips when you turn your headlights/radio/horn/etc. on. Or watching to make sure your car is charging at the correct voltage, not over or under charging.

All of this generally means a hell of a lot more and is more subject to change than the air:fuel ratio of a car. The way Nissan intended the car to function, the AFR should never really change a lot, so it's useless to monitor it.

Yeah have driven it home off the gate have boosted it on to4z tune Mark said it would be okay, Until we do the full tune. Felt lively with just 1bar under foot quick spirt in second had good pull. But its in the shed awaiting for the tune day, 600kw Ya reckons guys I wont know what hit me.

You will love it! Keep some undies in the glove box ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...