Jump to content
SAU Community

Recommended Posts

Depends if he is running E85 or not, my 6262 went 450kw on a hubber running E85 with baby cams. When it was making that power top end it was only running 19psi.

I'm sure on 98 you should go close to 400rwkw on 20-22psi with a 6262

Got a new fuel pump (Magnafuel) that arrived today... Getting it all ready tonight and hopefully back on the dyno tomorrow.

See how it goes on 1.6bar throughout the rev range, hell if I get cheeky might go 2bar and go for 500kw :)

Got a new fuel pump (Magnafuel) that arrived today... Getting it all ready tonight and hopefully back on the dyno tomorrow.

See how it goes on 1.6bar throughout the rev range, hell if I get cheeky might go 2bar and go for 500kw :)

Do it. You won't do it. :P

myengines back in the car, 6266 is bolted on and custom oil/return lines made

just waiting to finish the dump and intercooler pipe then its turn key, wont be atleast afew weeks till its tuned to post results (on e85)

simon R32 keen as to see your results mate, whats the flow difference between the walbro e85 and ur new pump?

myengines back in the car, 6266 is bolted on and custom oil/return lines made

just waiting to finish the dump and intercooler pipe then its turn key, wont be atleast afew weeks till its tuned to post results (on e85)

simon R32 keen as to see your results mate, whats the flow difference between the walbro e85 and ur new pump?

Walbro 355L/hr at 70psi and the Magnafuel Protuner 625 402L/hr

Walbro is so much better... Smaller, lighter, quieter and cheaper but can't be used externally so I had to look at other options.

Fired up the Magnafuel tonight, it's pretty loud (would be louder than a pair of 044s) but it should do the business

Did you replace the Walbro due to outright flow or lack of stability in pressure...or other reason ?

I had a Walbro in the Green car, was perfect. The GTR had a surge tank and Bosch 044, it ran out of flow so I needed to go either twin 044's or a big single pump, hense the Magnafuel getting the tick.

Hey guys, Nearly D Day for my GTR to jump on the rollers With the 6766 CEA & e85. Be Interesting to see what Jez can do with the beast Dont think hes tuned something this big as yet Maybe, except for the T88 Top Secret GTR.

I bet Alot of you guys are wondering what the 6766 can do on a Built RB26, Well I havent seen what they can do as yet anyways. shes got big cams in her so will be interesting 280 11.5mm Lift Just hope the engine likes the boost that these turbos produce.

Twin scroll ryan 4inch inlet & 3inch out from memory. Has 3.5 inch exhaust but not that thats going to matter its coming straight out of gate so should sound the goods lol.

What comp ratio is the engine? Any tricky headwork?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...