Jump to content
SAU Community

Recommended Posts

Hey guys

I'm organising a group buy for a full kit (front and rear) of HEL stainless steel braided brake lines.

aw11-kit.gif

All HEL hoses are legal to be fitted to any vehicle worldwide and have FMVSS-106, ADR, LTSA and DOT and TUV approval.

These kits cost anywhere from $150 - $200+ in Aus.

If we can get ten (10) or more kits than the price will be $115 Delivered Australia wide.

Now most of us have factory brake lines that in some cases can be 20 years old for R32's and 15 years old for R33's; for optimum performance, these are due for replacement! However a factory replacement set of rubber brake lines costs more than this group buy price!

To put it into perspective a Nismo braided brake line kit from Nengun will set you back over $300 delivered so this is bloody cheap. I was prepared to pay more than this but this price is fantastic.

I'm going to be purchasing a set with this group buy myself and will post up pictures of the installing to assist anyone with the installation. I will be using Motul fluid which I recommend every one does and the combined upgrade with a good brake bleed should provide a great pedal feel. If you're looking at changing your complete brake fluid soon, you might as well do the lines at the same time.

Some information from HEL's website:

http://www.helcarkits.co.uk/

Despite what the salesman tells you - every modern car has compromises, normally instigated by accountants rather than engineers. One such compromise is the materials used for the brake hoses on your car. Rubber hoses or mild steel fittings are cheap but we all know how rubber hose bulges under pressure, allows brake fluid to absorb water vapour from the atmosphere and that mild steel fittings rust....We manufacture a complete replacement stainless steel brake line kit for any car which is fitted with a hydraulic brake system and as we only ever use stainless steel fittings for the automotive marketplace so we can offer the HEL Lifetime Warranty on all brake line kits.

Manufactured to the highest possible industry standards by Hose Solutions and a carefully selected trained manufacturing outlets, the HEL Performance car brake line kits are brand new to the tuning market, building on the worldwide success the product has had in the motorcycle market for the last 10 years.

Incredible value for money for premium quality braided brake lines.

When you buy HEL Brake Lines, they will be:

• High quality, 100% stainless steel, non-corroding braided brake hoses.

• FMVSS-106, ADR, LTSA, DOT and TUV approved.

• So reliable that they're used in many high performance, racing and custom cars.

• Coated in a wipe-clean PVC cover with a choice of 19 colours.

• Included with a fitting kit if needed, HEL stickers and a lifetime warranty as standard.

These are braided brake lines you can 100% trust in any type of car. Your braking will feel smoother and stronger. That spongy brake feeling will be eliminated, making your brakes crisp and responsive.

So whats available? Well here's the main Nissan import list, however heaps of other kits are available so if there is a different car kit that you want, send me a message and I'll see if it is available. No R34 GTR unfortunately.

• Nissan Skyline R32/R33 GTST

• Nissan Skyline R32/R33 GTR

• Nissan Skyline R34 GTT

• Nissan Skyline R35 GTR

• Nissan Silvia S13

• Nissan Silvia S14

• Nissan Silvia S15

• Nissan Z32 300ZX

Now the HEL kits are available in a few colour choices. However to order each car kit with different colour combinations from England is going to cause dramas with mistakes so I would like to avoid this. Therefore I would rather have all ten kits the same colours so no mistakes are made (if you REALLY need a different colour then PM me and maybe ill look into it but I would rather not for every ones sake). Therefore the colour choice can be voted on but I think it should either be black, silver or clear. At the end of the day who really cares about the colour, but each to their own.

I will keep the group buy open until Sunday 25th April 2010.

After 10 people are gathered I will need full payment within one week, Sunday 2nd May 2010 into my bank account. I will message every one with my account details and ask that you reply with your full mailing address. I will then transfer the money to the supplier once all the money has been transferred and the kits will get sent via FedEX within a week of them having all the kits ready. I will receive the kits and then send them out to you ASAP so you should see them within a few days after this. ETA should be early May if everything goes smoothly.

Please bare with me as this is my first group buy and I hope things will go smoothly for everyone. If you have any further questions feel free to ask and I will do my best to answer them.

Admin, hopefully I have included everything I require into this group buy, if I have left something out please let me know before you lock the thread.

Thanks guys.

Phil

PURCHASE LIST

1. PMR33 - R33 GTST

2. LUKAS 33 - R33 GTST

3. …………

4. …………

5. …………

6. …………

7. …………

8. …………

9. …………

10. …………

Edited by PM-R33
  • Replies 351
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Righteo this is turning out a lot better than expected, i'm going to see what better pricing we can get if we get 15 or 20 people. I'm allready pretty happy with the price but a few extra bucks always helps. I'll let you guys now.

So latest list:

1. PMR33 - R33 GTST

2. LUKAS 33 - R33 GTST

3. DYNOSET - S13

4. LOKIR33 - R33 GTST

5. TOYGTR - R32 GTR

6. 89CAL - R33 GTST

7. MR TURBO - R32 GTST

8. DORI34 - (R34 GTT or R33 GTST)

9. BASTI - R33 GTST

10. …………

11. …………

12. …………

13. …………

14. …………

15. …………

i have a R34 non turbo but with GTST brakes, not sure if R34 GTT & 33 GTST lines are the same tho?

I used R33 GTST brake lines with the kit so im assuming i have to get 33 GTST so put me down for this >_<

Cheers mate

also just curious, as per group buy rules, which company are you sourcing these thru?

I used R33 GTST brake lines with the kit so im assuming i have to get 33 GTST so put me down for this :cool:

Cheers mate

also just curious, as per group buy rules, which company are you sourcing these thru?

Ok no worries mate R33 GTST it is.

Woops sorry thought i wrote it in the first post, Hel in England.

Righteo this is turning out a lot better than expected, i'm going to see what better pricing we can get if we get 15 or 20 people. I'm allready pretty happy with the price but a few extra bucks always helps. I'll let you guys now.

So latest list:

1. PMR33 - R33 GTST

2. LUKAS 33 - R33 GTST

3. DYNOSET - S13

4. LOKIR33 - R33 GTST

5. TOYGTR - R32 GTR

6. 89CAL - R33 GTST

7. MR TURBO - R32 GTST

8. DORI34 - (R34 GTT or R33 GTST)

9. BASTI - R33 GTST

10. …………

11. …………

12. …………

13. …………

14. …………

15. …………

sorry mate ill need kit for r33 gtst

sorry i for got to tell you

Ok no worries, its the same kit anyway :cool:

I'm waiting on a couple of mates to let me know if they are also in on the group buy and ill update the list later on.

i have r32 with ecr33 calipers and rotor. not sure which brakelines was used.

would like to be count in. can you post them to Port Moresby, Papua New Guinea?

and Paypal?

just a suggestion why dont include the clutch line as well?

Edited by zephyro90

UPDATE: Since we nearly have 15 people, group buy price is now $105 Delivered Australia wide :D

Latest list:

1. PMR33 - R33 GTST

2. LUKAS 33 - R33 GTST

3. DYSONEST - S13

4. LOKIR33 - R33 GTST

5. TOYGTR - R32 GTR

6. 89CAL - R33 GTST

7. MR TURBO - R33 GTST

8. DORI34 - R33 GTST

9. BASTI - R33 GTST

10. EVLGTR - R32 GTR

11. ZEPHYRO90 - R32 GTST (PNG)

12. PEZHEAD - R33 GTR

13. ROBBO RB180 - (awaiting confirmation of kit)

14. FORCEFED - (awaiting confirmation of kit)

15. MLR - R33 GTST

16. …………

17. …………

18. …………

19. …………

20. …………

Guys I now realise that waiting three more weeks is probably going to get 50 kits sold at this rate lol. So i'll give it a few more days and see where we are with numbers. If we start to get into 20-25 kits, I think i'll end the group buy at that amount if no one has a problem with this and it aint breaking any rules. I'm just getting worried with the high amount of kits mistakes may be made and customs might start to be a problem. Also I don't know if they just keep 20 kits of each model on the shelf so don't want to cause delays if I give them an order for 30 GTST kits lol.

If we still have a lot of interest and people have a problem that the group buy was closed early I don't really have a problem with doing another one after this one to keep people happy.

Also I have had a few people enquire about clutch line kits and if there is enough interest I could do one for that if people are keen.

With regards to the colouring of the PVC tube, I have decided from seeing every ones comments and talking to friends in the group buy we shall go clear tubing. This means the natural colour of the stainless steel braided line will be visible. Hopefully this is ok.

Thanks guys

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...