Jump to content
SAU Community

Recommended Posts

I decided to post this up because I am sick of all these dickhead car yards selling cars they have no or very little idea about and are misrepresenting said vehicles to potential buyers.

Case in point #1

M35 Stagea

Can anyone spot problems with this ad? Here are the obvious ones (please chime in if you find more)

1. The model designation is either an "NM35 Autech Axis" or an "AM35 Autech Axis".... "PM35" is the face lifted model which were in production 2005 onwards

2. It DOES NOT have either a 3.5L or a 3L-turbo engine. The engine is a VQ25det... as in a 2.5L Turbo

3. 2004 model Stagea? The 2004 model M35's are not eligible for compliance due to stricter emissions laws here in Australia. The engine cannot meet those laws in stock trim.

4. Anyone tried putting that VIN in FAST? Yep, 2 digits too many

Case in point #2

M35 Stagea

*sigh* again, this dealer has 2 mysterious extra digits in the VIN. Is this incompetence or flat-out dodgy? :blink:

I happened to call this dealer to let him know of his errors only to be met with "Are you talking about cars in MY yard? What the f*ck would you know about the cars in MY yard!"

(I can understand someone calling an saying that his ads are incorrect might piss him off, but I did so in a friendly manner)

I am sure there are a heap of "odd" ads out there and we seem to know of a

that knows little about these vehicles that have the "same interior as a 350z"....

So I guess what I am saying is, if you could be stuffed, post up any incorrect ads you come across (I know the whole "what is and isn't OEM" is needed with Autech C34's)... with corrections and maybe a recommendation of a yard that you would suggest the buyer to go to instead. I know that if I was a buyer that knew nothing about these cars (as I was 3 years ago) and was looking at buying a car in one of these ads/car yards, I would like to know what is and isn't correct.

If you can't be stuffed, then, well don't bother :worship:

If you happen to be reading this and in the market for a Stagea, there are actually a number of car yards out there that know their vehicles.

One I can recommend from personal experience is Northshore Prestige. From experience, not only have they been PROPERLY complying M35's for 3 years or so, but they are a helpful and pleasant group to deal with. They are also currently the ONLY yard that can sell the 3.5L M35's.

Hopefully this turns out to have a number of highly recommended car yards (that can back up recommendations)... as well as some "corrected" erroneous ads.

Link to comment
https://www.sau.com.au/forums/topic/314725-know-your-stagea/
Share on other sites

I totally agree with you, the same dodgy ads appear for imports in general and it really gets up my nose, it must be really easy to get in the used car buisness or something considering people with no knowledge what so ever can get into it.

Yeah, I nearly gave up on buying one. I never realised buying an M35 would be so much of a f**king hassle.

I would like to say be wary of these two places...

http://www.drive.com.au/used_car_dealers/g...956results.html

Here is their "AXIS" - Clearly an AR-X : http://www.drive.com.au/used-cars/NISSAN/S...145194&pt=1

Another "Axis" (I test drove it...) - An AR-X with Colour Matched bumpers, I believe the interior is the dead giveaway : http://www.drive.com.au/used-cars/NISSAN/S...145194&pt=1

The fact this place operates out of a small shed with no signage, the husband struggles to speak english (no I'm not racist), but when I ask questions about the car, I find it annoying when someone needs to translate it to them, then back to me...

And also THIS PLACE - Not a very professional setup at all...

I'd recommend Northshore Prestige. Even though I didn't buy from them, they were keen to help me out...

I bought mine from Japlink Motors. The guys there were pretty casual, and were quite helpful. I bought the car with two bald tyres, and got them replaced, they were more than happy to compensate the cost (even after me getting it done without their approval) They had nice cars in their getting worked on, so it sort of reassured me that they aren't some dodgy ass hobo group if they have customers trusting their cars in there...

Anyway thats my 2 cents.

i wonder if they are pleading ignorance or simply dumb...

notice on both AXIS is just in the ad name and not in the description so if anyone was to complain they could try to weasle out of it.

either way they should learn the product they are selling.

Pfft, the problem with most places is that the staff are salesmen first, and enthusiasts somewhere wwwwaaaaayyy down the line there. They don't really care too much about the product (and generally aren't required to), as long as they can convince the customer to sign on the line.

Remember, the majority of people out there either couldn't care less about the car or buy it in a heart ruling head situation or emotional state, where they think "hey, this thing looks good, I think I'll buy it."

I had some issues with a certain dealer .

Found a Stagea I liked on car sales, made the call to see if they still had the car as I wanted to come around and have a look (Money in pocket).

I was told it was in stock and ready for me to look at. Drove out (an hours drive) to check it out. On arrival I was told it sold 2 hours ago, BUT 'we do have these in stock, come check them out'.

Told him where he could stick it and left. :cool:

End Rant.

find me a ar dealer that can tell the difference between a DVD rom and a DVD player. the amount of people that call me saying these cars play DVDs is astounding. even more so are the dealers that tell me they have played DVD's in the the thing..

one of you hit the nail on the head - I like therefore I buy.

A very good thread to start Cam for anyone who is interested in buying an M35 Stagea. I too am surprised and appalled at how much mis-information is out there on these cars, especially from dealers themselves. After all, dealerships who sell them should know know their products. But they don't. Even if they are unintentionally advertising something that's not what is claimed to be, it's the end consumer that will ultimately pay for their mistakes if the buyer is not aware of what they are buying. If you are unsure of what the model is, come in here and ask. Another simple way to tell is check the build plate on the car itself. Check the VIN/chassis number and it should start with NM35 or PM35 or PNM35. A genuine Axis though is a little harder to work out it's authenticity. One of the sure ways is to put the vin number through FAST.

And as Cam mentioned, another point to note is that Northshore Prestige Motors is the only importer that can sell the series II Stageas (PM35 or PNM35) with the VQ35DE non turbo engines which were built between 2004 and 2007. So if any other importer is advertising a PM35/PNM35, be careful.

unfortunately, the "grey" import laws that were bought in to stop some of the general dodgyness surrounding JDM car imports really just concentrated the dodgyness to the select few that were given compliance approval. At the time I bought my stagea, there was only one imprter in WA with compliance approval, and they did some dodgy shit that I still cant believe to this day, such as inmporting 25X stageas that had copped a +T and passing them off as RS4's....

  • 2 weeks later...

And also THIS PLACE - Not a very professional setup at all...

I'd recommend Northshore Prestige. Even though I didn't buy from them, they were keen to help me out...

I bought mine from Japlink Motors. The guys there were pretty casual, and were quite helpful. I bought the car with two bald tyres, and got them replaced, they were more than happy to compensate the cost (even after me getting it done without their approval) They had nice cars in their getting worked on, so it sort of reassured me that they aren't some dodgy ass hobo group if they have customers trusting their cars in there...

Anyway thats my 2 cents.

[Yep, I got burnt by "This Place...Beware.]

And also THIS PLACE - Not a very professional setup at all...

I'd recommend Northshore Prestige. Even though I didn't buy from them, they were keen to help me out...

I bought mine from Japlink Motors. The guys there were pretty casual, and were quite helpful. I bought the car with two bald tyres, and got them replaced, they were more than happy to compensate the cost (even after me getting it done without their approval) They had nice cars in their getting worked on, so it sort of reassured me that they aren't some dodgy ass hobo group if they have customers trusting their cars in there...

Anyway thats my 2 cents.

[Yep, I got burnt by "This Place...Beware.]

I've heard some bad things about them, my experience was not overly bad and I'm very happy with my purchase however.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...