Jump to content
SAU Community

Recommended Posts

i hate reading this stuff, i have never put anything but Bp in my car, all from the same servo, (at the end of my street) never had to fill it up anywhere eles. Would haet for this too happen to me, Feel for ya Duncan, Stick it right to em mate!!

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

haven't got a response yet but I won't let it slide long, and will keep everyone updated.

God_speed....same here, the workshop bill is $500ish as per above. glad it was a fuel problem - but in my case I was literally driving home from the workshop tuning it so there was no question about taking it straight back.

Thanks mate I've bookmarked this thread. They say you shouldn't fill up when the tanker is at the servo filling up the bowsers as the sediment gets all stirred up. Problem is you never know when you pull into an empty servo forecourt if a tanker has just left 60 sec ago.

Can't believe they put the wrong fuel in the wrong bowser though if that's the case. Imagine if it was diesel...

Does anyone think Vortex 98 would be better than BP Ultimate? I use 98 all time and rarely get pings.

in my car yes, I find Caltex and Mobil work best for me, with United (ethanol ron98) and Bp 2nd best. Shell for my car is like pouring honey in it, and it doesn't matter which station it is.

but in previous threads we have come to the conclusion that it depends where in the state and what petrol station you use can have an impact of fuel quality and ron rating. EG: a petrol station with high turnover is more likely to have fresher fuel with a better ron rating than a quiet petrol station.

And some cars just behave differently to different brand fuel, even though there are only 2 or 3 oil refinereies in Australia.

From other threads, Generally people don't notice much difference between caltex, mobil, united, bp fuel here in sydney in their skylines. but a stock or mildly tuned skyline turbo tends to not run as well with shell ron 98 (but not always). I paid close attention to the other threads because I could easily feel a big difference between shell fuel and other fuels in my particular skyline and wanted to know if anyone had noticed it in their cars aswell.

FWIW I run 98 octane in 4 different cars including the race car, and I have never found any variation between any brand. If there is a difference it is the sort of 1% that you would never notice or feel unless your tune was too aggresive in the first place.

This thread is about a genuinely rubbish batch of fuel, not a comment on one brand v another

FWIW I run 98 octane in 4 different cars including the race car, and I have never found any variation between any brand. If there is a difference it is the sort of 1% that you would never notice or feel unless your tune was too aggresive in the first place.

This thread is about a genuinely rubbish batch of fuel, not a comment on one brand v another

Threads always evolve Duncan and I wasn't replying to your thread I was replying to Owens, i'm sure he finds it interesting that someone else can notice different fuel in his car, I can easily tell if Shell fuel is in my car, even if somebody else has taken my car and put Shell fuel in it without me knowing. Anyway thats your experience with race cars, I only get the problem in the skyline out of any car I have ever filled up and used (that I can notice), some skylines react worse than others with shell, no body has worked out why but I am far from the only person who has noticed this issue and it happens in both series 1 and 2 rb25det's. and usually it's when a standard ECU is being used. That's all i've worked out from info in other threads.

Does anyone think Vortex 98 would be better than BP Ultimate? I use 98 all time and rarely get pings.
FWIW I run 98 octane in 4 different cars including the race car, and I have never found any variation between any brand. If there is a difference it is the sort of 1% that you would never notice or feel unless your tune was too aggresive in the first place.

This thread is about a genuinely rubbish batch of fuel, not a comment on one brand v another

Hey Owens, if you do a quick search you will find lots of stuff on the subject of fuel brands and tuning; plenty of good info

Duncan, I've found the receipt from last Thursday night's fill up, so I'll be hanging onto that in anticipation for next Monday. I'm a bit worried though that by next Monday it will have been 1 1/2 weeks since filling up though; might not help my chances when confronting the servo if it's their fault.

  • 2 weeks later...

Any updates from Shell corp Duncan?

My car's been with the mechanic now for a week. They've noticed some misfiring but don't think it's bad fuel; couldn't find any fault codes and they're getting the sparky in now (charges /hr of course).

Wouldn't it be the done thing to drain the tank and put in fresh fuel as part of eliminating the cheapest problems first? :D I'm just going to have to go along with their expertise... :D

Yes I do have an update!

Shell's insurers/lawyers sent a letter saying ".....we have investigated your claim and conclude there was no defect in the quality of the fuel.....we are not able to reimburse you for the cost of the repairs".

So I have now lodged a claim with the NSW Dept of Fair Trading. No doubt it will be slow progress from here but I am not willing to let it go.

Interestingly, the lawyers responded immediately that I told them a claim had been lodged, all very aggressive.

Good luck with the Dept of fair trading Duncan..

All too often the little guy gets screwed by these companies who could care less what fuel or fuel quality is in the bowser..only to give you the bullsh1t excuses that you also received (nothing wrong with the fuel quality).

This really pisses me off & we usually walk away and cop it on the chin..and these companies know that.

I hope the dept of fair trading can actually live up to their name.

Keep us updated.

Thought about investing in WMI? setup propperly in theory you could run your stag on 91 without much trouble. though i doubt anyone has actually put it to the test as most people dont buy it as a safety net, they use it for more power.

I've kept a small sample of fuel in a clean container but have 60l of the stuff sitting around the mechanic's :P

This, my friend, is the evidence ^^^ that the fuel company or service station will be most afraid of ! ! ! ! !

By the time the legal process makes a determination, would it be best to already have the above sample analysed, with date attached, so that the fuel company or servo cannot rebutt on the basis of time causing fuel degradation Duncan?

If you need a J.P. to sign a statutory declaration at the 30/5/10 general business meeting, I'll be happy to witness it for you.

How about sending some of the 60L to an independant fuel checking place and having it tested?

No one would be shocked to hear shell tested a shell product and said it was fine

How exactly did the lawyers/insurers respond when the claim was lodged?

This, my friend, is the evidence ^^^ that the fuel company or service station will be most afraid of ! ! ! ! !

Sadly mate, evidence it is not, you would need to sample the fuel with the seller present, seal it in front of them, label-sign and seal with a tamper proof seal which is recorded on the paper work then send it for testing with people signing for it along the way.

Ive had a fair bit of training on the collection of evidence, its extremely painful to collect evidence that will hold up legally.

Its like they say in defense, is your arse isn't covered, its gonna get screwed.

Hehe...

I never said that the sample once tested would be complete and irrefutable Mark.

If you read my post again, I said that this evidence, once tested, is what the fuel company or servo would be most afraid of!

What is corroborating evidence, would be any record of CCTV on that day (which can be subpoenaed if available)!

What can underpin that evidence or support that evidence would be a signed & countersigned statutory declaration (which I did also mention).

Such a declaration by Duncan would state that the furnished fuel sample which has been tested, is the very same fuel that was bowsered into his tank.

The declaration would then state that his car after the fill-up, behaved quite uncharacteristically (describing symptoms).

The declaration would then state that the offending fuel once removed, had been stored on the premises of a qualified MTA technician.

A separate statutory declaration can be made and then obtained from the mechanic to state that the offending fuel from Duncan's car is the same fuel that has been analysed and then furnished as evidence.

All jigsaw-puzzle pieces should dovetail - not forgettinging date - and time!

Cheers

Yeah same thing happened up here...mobil warners bay. Manager even admitted that the guy filled the tank with regular unleaded. My next question was why he was still advertising and selling it as premium.

It was in Dave's car, manager refunded him and also invited him back for a full tank of fuel when the Synergy 8000 returned.

He left driveway got to the top of the hill and.....ping ping ping !!!

Dave is a bit of a pushover...i may have not been so understanding.

Edited by Swiper the Fox

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...