Jump to content
SAU Community

Twin Lowmount Turbos Gtr With Screamer Pipe?

Chris32R

By Chris32R,
in Engines & Forced Induction

 Share

Recommended Posts

Chris32R Proficient

Chris32R

Posted
Posted

Hey guys,

Can an internally gated twin turbo GTR have a split dump pipe where the wastegate opens and vents the excess exhaust gas to the atmosphere?

Has anyone done it? Info?

How would it perform compared to it being plumbed back into the exhaust?

Cheers

XRATED Veteran

XRATED

Posted
Posted
Hey guys,

Can an internally gated twin turbo GTR have a split dump pipe where the wastegate opens and vents the excess exhaust gas to the atmosphere?

Has anyone done it? Info?

How would it perform compared to it being plumbed back into the exhaust?

Cheers

yes you can, it's been done plenty of time before... why on earth would you want to? for the fully sick wickid hecktic screamer sound?

your not going to gain much in the way of hp, it's dangerous and it's completly illegal.

J.

MrStabby Grand Master

MrStabby

Posted
Posted

There is a thread on here somewhere where the wastegate pipes on split dumps were cut to make screamers. But yeh, sik ulehs only need apply for that mod....and track only.

zebra Grand Master

zebra

Posted
Posted
yes you can, it's been done plenty of time before... why on earth would you want to? for the fully sick wickid hecktic screamer sound?

your not going to gain much in the way of hp, it's dangerous and it's completly illegal.

J.

Screamers with internal gates sound like Arse!!

actually after having an ext gate screamer ive decided all screamers sound like arse.

zebra Grand Master

zebra

Posted
Posted
Haha fair enough.

Was more interested to see if there would be any gains to be had as I know there is with external wastegates and screamer pipes.

No gains to be had, unless the cat back or dump pipe is a rectrictive pos, even with extrenal gates

Chris32R Proficient

Chris32R

Posted
  • Author
Posted
Just get under the car an unbolt the exhaust at the cat, throw rest of the system away and a attach pipe that exits under the passenger side door , its the only way to roll.. :P

Ok thanks, i'll let you know how I go with that.

Piggaz Grand Master

Piggaz

Posted
Posted

haha. Its going to be waaaaaaaaaaaayyy too loud if you do that.

Have you ever heard a kakimoto Full Mega N1 on song? I get asked all the time if I have screamer pipes. Its pretty tame up until the gates open... but oh my what a note :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...