Jump to content
SAU Community

Recommended Posts

Hi all,

I have an R33 GTS-T with 87,000ks

The gearbox was a little notchy when I bought it so I did a service as recommended on this site with the castrol VMX 80. I also used the Nulon anti wear additive.

It has improved all shift and noise but the box still has a nice notch into second until very warm, dosnt usually crunch (has happend once I think?)

Is this normal for one of these? or is the box screwed?

Would using the redline shcokproof stop the notch for a while?

Where do you buy this redline stuff and what weight is recommended?

look forward to peoples thoughts

my 34 has a notchy shifter (1st 2nd only) when cold and I've put that redline stuff (shockproof/smurfs blood) and I'm not sure it has improved anything... If you intend to be keeping the car for a while I'd say save up some dough and get the gearbox and synchros reconditioned for teh win.

Hey mate, i had exactly the same situation, bought the car when it had bout 85000k and gearbox was pretty stiff from 1st to second when cold, got redline in there now, still noticeable for the first few shifts but much better than before!

rb boxes r often notchy when cold, just take it easy. lightweight might help a bit no experience with it. heavyweight is rubbish for the gearbox, i dumped the oil after a week!

maybe try motul fflsd 75/90+nulon additive i've used it many times on customers cars and my own

see how ya go, if its synchros stuffed, nothing can bandaid that :P

redline will help the problem but give valvoline super synth 75w90 a go, its only 50 bucks, i had a crunchy 2nd gear in a past car, dumped the vmx80 out of it, changed it to 75w90 valv, still kinda notchy wen cold but after 5mins, it was perfect

vmx80 made it crunchy wen cold and notchy wen hot

some boxes love vmx80 though, it all depends on the condition of the box, different boxes like different weights, that is why you will often find people will have different views on oils, especially with gearboxes

edit: i just checked out that site, very cheap pricing on the redline oils, i will order some smurfblood for my gtr :P the prices on that site are almost half the price of redline products i see on shelf at shops in perth!

Edited by snozzle

yeah the vmx80 was great when it went in, note I used the nulon g70 too but its gotten worse again.

Very stiff when cold, only into second and not that flash wehn hot either, i might try the redline and see if it makes a difference

do you use the nulon dditive with the redline shockproof?

I recently pulled apart an R32 RB25DE box with pretty low kays on it as I had it in my track car, the box is smooth and quiet and everything worked nicely except that once it was nice and warm the top gear synchro stopped working.

In a nutshell, while the synchro wear was within factorly limits, it just did not work when it was hot and different oils made no difference. I change dthe top gear synchro ring and it now works perfectly, the only problem is that now the other four feel tired comapred to it including the standard notchy shift from first to second. Someone mentioned that RB boxes are pretty well known for it, I would go further back than that, it is fairly typical of Nissan and Datsun boxes in general. So long as it is only noticeably notchy when it is cold I would just go easy on it and worry about it if the synchro gets batty when it is hot. I plan to pull my box down again later this year and replace the rest, along with having a look to see if I can swap the top gear with my other box, which is an R31 RB20DET box and has a shorter top gear ratio that is much more suited to track use.

You want "lightweight shockproof" and get it from http://www.performancelub.com/ (excellent customer service)

+1 for Harold hs Awsome to deal with.

the R32 gtr box 4US qaurts of Redline.....

ok I have ordered the oil. Ten out of ten for customer service from harols (the website recommended above)! just fantastic. Oil should be here tomorrow.

Now here is my question. I have vmx 80 with the g70 additive in the car now, has been there for about 1500ks.

Apparently the g70 reduces friction and causes the syncrhos not to engage. If I drain the oil overnight will it get all the nulon out or do I have to flush it? If I drain it will the little bit of nulon left upset the redline oil?

thoughts would be appreciated, just such a pain to drain it, dont want to do it more than I have to if it can be avoided

thanks

  • 1 month later...
redline will help the problem but give valvoline super synth 75w90 a go, its only 50 bucks, i had a crunchy 2nd gear in a past car, dumped the vmx80 out of it, changed it to 75w90 valv, still kinda notchy wen cold but after 5mins, it was perfect

vmx80 made it crunchy wen cold and notchy wen hot

some boxes love vmx80 though, it all depends on the condition of the box, different boxes like different weights, that is why you will often find people will have different views on oils, especially with gearboxes

edit: i just checked out that site, very cheap pricing on the redline oils, i will order some smurfblood for my gtr :D the prices on that site are almost half the price of redline products i see on shelf at shops in perth!

what was the site were u got the redline gearoil for almost half price

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...