Jump to content
SAU Community

Recommended Posts

Hi everyone!

I am just wondering what everyone thinks about R34's and if they would sell in Australia.

My uncle, has undertaken ISO for his Workshop and just deciding on the car to import under RAWS.

His ideas are R34's or Rx7 (1998)

I think R34's are best as they have GTS-ts and also the GTRs.

He said its possible to import the GTS-t, and sell for 35k fully complied, and the GTR for 70k fully complied.

What does everyone else think? Is it worth doing? He wants to have cheaper prices then they are selling now so they become more common in Australia.

PS. The GTRs would not be V-specs as that is another SEVS compliance.

Cheers

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

the v-spec has the exact same power, same torque, same drive train.

The difference is the v-spec has the ATTESA ETS PRO. the normal attesa system can transfer 50% of the cars torque to the front wheels in 1/100th of a second.

the attesa ets pro does it in 1/1000th of a second.

did the r33 gtr vspecII have a carbon fibre bonet or was that the r34?

the r34 vspec came with underbody diffusers and a different diff. i think in the vpsec the diff was electronically controlled?? i could be wrong.

the vspec and vspec II models were also heavier than the nromal GTR

also some stiffer suspension and a vspec badge.

edit : grrrr i cant upload the vspec diff

Actually Evo 7s or 8s were the next car we were planning on targeting if we can get the ball rolling.

The reason that all cars (allowed by SEVS) could not be brought over, is purely financial and time constraits. We also have to be sure that people are willing to purchase the vehicles. Therefore I'm just asking everyone around to see if there is a genuine interest for bringing in these vehicles.

So keep letting me know your thoughts and comments on R34s or any other vehicles applicable to be brought in under SEVS guideline.

To get a GTR-R34 V-spec in you have to do a whole new compliance, where as a R34 compliance allows you to bring in GTS to GTR (Standard)

If there was a large market we would also consider V-specs, which would retail for only about 5k more than a Standard GTR.

Thanks

ohh btw..just correcting you a bit hehe

For an R34 turbo - RB25DET is called a GT-t not a GTS-t

GTS-t is only for an R33 and R32  

btw whats the difference between a GTR v-spec and a normal GTR?

Well seeing as we're doing a little correcting, here's a little correction for you hehe :D

The R33s aren't GTS-ts, they're GTS25ts and the R34s are 25GTts

Where have you been living? R34 are driving around plenty on the streets, and there are many already in the country.

As for EVOVIII not much chance as they're selling them locally for $65k soon and all imported versions have been an absolute ripoff. At least it will settle those prices to more realistic level.

For $35k you can bring in a GT-T through a number of importers very soon - so it would be hard to remain competitive, there would be nothing "exclusive" about what he was selling at least. But people would be interested.

Hi all.

Since we are making corrections on this thread I figure it is my duty to correct a bigun from gekisouzoku.

I am at the final stage of gaining RAWS certification (FORS audit - Soarer) and I am good mates with the proprietor of Shogun (who should be the first RAW in Oz with R34 plates). He has informed me that the R34 GTR and V-Spec can be complied without needing seperate certification. However any R34 GTR must be certified seperately than the GTT as the engine evidence is totally different (RB25DET NEO versus RB26DETT). In other words if your test car was an R34 GTT you can only comply R34 GTTs but if your test car was an R34 GTR (either kind) you can comply both normal and V-Spec models. Also, apparently there are problems at the moment with R34 GTRs passing emmissions testing under the new system as the written evidence of the previous low volume system is no longer valid. I am told it could take some time and some (legal) trickery to get them to pass.

Anyone is welcome to correct me if I am wrong.

Have a good one.

Hi,

Garage Menace, I would agree that that does sound more likely BUT if you check out the standards on the RVCS SEVS list, Entry No 030/00

It clearly States the variants of the R34 you can import:

Variants: 25GT Turbo, 25GT-V, 25GT-X, 25GT, 25GT-X Four, 5GT Four, GTR

Yes it is 3 different engines:

rb25de, rb25det,rb26dett

So unless they are wrong (which is actually highly possible for government agencies), then what we plan to do is ok.

Entry No. 022/00 is for V-spec R34 GTRs

is for rb26dett engines the only variant it states is V-spec (no others are mentioned.

This is a bt confusing to me now :s

Thanks

DoughBoy, that is Shogun Car Company in Brisbane.

Gekisouzoku, I will check again but while all of the R34 models you mentioned are eligible for importation and compliance, only the specific models on a RAW's schedule can be complied. All the SEVS list is is a list of vehicles which are eligible for importation and compliance once one has passed through the relevant (and exhaustive) RAWS acreditation process. That doesn't mean that one must be specifically acredited for EVERY single model in order to comply different models, but when there are significant differences (ie. RB25DET NEO versus RB26DETT) between models one must supply extra evidence that that model complies with the relevant ADRs. For example, if you have passed all the requirements and have R34 GTTs on your schedule, can you prove that the R34 GTR you are about to comply meets the relevant emmissions standards for the RB26DETT? To the best of my knowledge you do not have to go through the entire test vehicle process again to get GTRs if you already have GTTs on your schedule, but you do have to supply written evidence to DoTaRS that the emmissions system on your particular R34 GTR test car complies with ADRs (as well as other differences). However if you have R34 GTRs (normal) on your schedule, you can comply V-Spec GTRs as the differences are relatively minimal. Like I said, I will check again before you can quote me for sure (and anyone else with specific knowledge on this topic is welcome to correct me), but that is how I have approached my RAWS application.

I realise I have just repeated myself a little however the RAWS system is very ambiguous and complicated (often the DoTaRS and FORS inspectors argue amongst each other regarding rules etc so pitty the poor buggers - like me - who have to interpret the Guide to Registered Automotive Workshops) and this is an important issue which needs to be understood in order to avoid people innocently and inadvertantly importing vehicles which then cannot be complied, and must then be re-exported or destroyed if the exact process has not been followed, with the obvious huge financial loss which would result.

I have rambled but hopefully this has cleared things up a little.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...