Jump to content
SAU Community

Recommended Posts

hi iv noticed there prices are different but also there both highly recommended buy alot of people on this fourum!.

I'm not looking for the cheapest tune I'm looking for the safest and best tune so I'm wondering who's been to both and witch do you prefer for nistune (i need to get the sister board installed )

Link to comment
https://www.sau.com.au/forums/topic/327553-chasers-or-status-for-tuning/
Share on other sites

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

I'm not looking for the cheapest tune I'm looking for the safest and best tune so

How about you talk to each workshop, and decide yourself?

There are a billion bad storeis, a billion good ones.

Go there and work it out in person.

Both have good rep so I guess its whats closer to you and what you personally choose. I myself got a tune at status and no complaints.

What he said.

But best you talk to them yourself and get to know them, all for the better.

yeah good point iv had a chat to status and he quoted around $800 for nistune and repmap (depending if my clutch or coilpack hold out )

havent personaly had a chat to chases but i was more wondering what peoples experiences were like because a mate got quoted cheaper at chasers but its about the quality of the tune (i dont know much about it they could tell me there changing the polarity of the flux capasiter and i would belive them lol)

just thort id ask before i made the mistake of going for the cheaper option !!

trent is a mate and has spent countless hours on my car, so i will rep him till the cows come home :D his tunes are as good as you will get and he specialises in nistune.

chasers are also excellent. paul has been flown overseas to tune cars on multiple occasions

you really can go wrong with either option

yeah good point iv had a chat to status and he quoted around $800 for nistune and repmap (depending if my clutch or coilpack hold out )

havent personaly had a chat to chases but i was more wondering what peoples experiences were like because a mate got quoted cheaper at chasers but its about the quality of the tune (i dont know much about it they could tell me there changing the polarity of the flux capasiter and i would belive them lol)

just thort id ask before i made the mistake of going for the cheaper option !!

Trent from Status (Chequered) Tuning is a member on SAU, you can PM him for any questions, I have meet him at a SAU General Meeting and my mechanic has heard only good things about his work.

Members on here will agree with me.

SAU memeber Ujin (Kenny) had his R32 GTR tuned at Chasers with a wicked 350+ kW's and it is an awesome piece of machinery.

Well if you know nothing about the tune and so on - then how will you know if you do/don't get a bad one?

Well that's why I'm asking !!!!!

where are you located? the workshops you mention are on opposite sides of melbourne..

I'm in cranbourne but work in footscray so ether one is fine

I'm looking at going with DND with Nistune. I was all keen to go with Trent but he's $250 more expensive. I'm certainly not going to suggest he's not worth that extra coin, but I am on a pretty tight budget so $250 is $250. And at the end of the day I figure most/all of the tuners on here are going to be fairly well respected. If they were no good they would have been figured out by now and essentially run out of town so I reckon it would be difficult to go wrong with any of 'em.

That's my 2c anyway :D

Yeah good if there on here to begin with then it's a fair chance they are going to do a good job after all a forum like this can kill there name if there not doing a good job !!!

Thanks to the people with helpful replys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...