Jump to content
SAU Community

Recommended Posts

  • Replies 147
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

If it was to be a MX-5 looking car then I'd have to go for the Bullet Roadster..

bullet-chassis-overlay.jpg

The supercharged version of course :down:

Cerbe---Supercharged-SS-014.jpg

I've heard from the Mx5 guys there are better things you can do with an MX5 and a V8

  • 2 weeks later...
Ever wanted the engine of one car in the body of another...I know you have

So the topic here is what 2 cars would really like to merge together if you you had all the tools and equipment at your disposal..

I have always wanted to merger these 2

subaru-impreza-wrx.jpg

I call it the VWRX !!!

Somehow we put the Wrx motor in the back, should fit pretty easy, and plenty of room for another diff in the front, then we just change the gearbox ratios so it has 5 reverse speed s and one forward and wallah!

Something like that anyway, so let your imaginations fly and if anyone is awesome at photoshop please do what i cant... :)

wow, very great

didn't that douche bag on monster garage or whatever put a rotary into a bug?

nah that was a worked beetle motor (belive it or not. with enough money a beetle can make power)

rusty bug. was trying to make it do 9seconds right? free engines are the best :)

Edited by boiracer
is it normal for a datsun 1600 to only have 2 doors??????

Not in Aus.

They were never delivered here. There are a few getting around, including one incredibly tidy cream one and they are worth huge $$$. Like, a good nick LHD 2 door in Aus, unresto'ed, >$30k.

There's also a Coupe version, which I'm not a big fan of. I'd give my left nut for a 2 door though.

130_0902_12_z%201971_datsun_bluebird_coupe_sss%20rear_view.jpg

31038b7044068b0cec40c9c242c01cb0.jpg

  • 5 months later...
  • 5 months later...

Arrival her housing with Riker, Shelby reveals she has an hesitant theory around how to hunting for the Borg, extrapolating a "Borg footprint" from their previous showdown with the Initiative. Discourse turns to the sociable operation and, regularise though Shelby takes the commencement to superior gone aggroup members, Riker interjects that not exclusive has he already appointed them to the absent squad but will be connection the unit himself. Shelby lets Riker screw, in no doubtful status, that she wants his job but then apologetically claims she was unconscious that he has no intentionof leaving the Project. Riker responds that she gift be the prototypal to cognise if he does end to give. On his way out of the lodging, Riker tells Shelby the info of that night's cards courageous.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...