Jump to content
SAU Community

Rb26 Into A Vs Commodore

Craig97

By Craig97,
in General Automotive Discussion

 Share

Recommended Posts

Craig97 Newbie

Craig97

Posted
Posted

Hey there,

Im looking for some advice. I have a VS Commodore which i no longer drive anymore and im looking seriously at putting an RB26DETT into it. For the time being i would want it to be pretty close to stock with a manual gearbox. My main questions are:

1. What will i need other than a front cut?

2. I have seen an RB25 in VS, is there much difference?

3. Who would be a reputable workshop to do this type of work?

Thanks for your help.

Link to comment
https://www.sau.com.au/forums/topic/329212-rb26-into-a-vs-commodore/
Share on other sites
Mandingo Proficient

Mandingo

Posted
Posted (edited)

1. custom engine mounts, crossmember, gearbox mount, tailshaft, upgraded diff, suspension, brakes, wiring IE Everything on a commodore.

2. yes. alot of difference. Not in the way they go in, internally.

3. I wouldnt undertake this sort of project unless I could do most work myself. (welding, etc) Why? because its simply not economical to pay someone to do the work. That and its not rocket science.

Edited by Flipmo
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Given a LS1 weights about the same, has more torque and will easily make good power...

Why not just go down that route especially considering you are paying a workshop.

If it was a DIY on weekends then fair enough, but paying workshop rates you should go the cheaper labour option...

FrangaR33 Mentor

FrangaR33

Posted
Posted

School holidays thread?? hmmm :)

Anyways if your chasing power and your currently driving the V6 do a V8 conversion, you can buy entire donor cars for as little as $1500 a couple of weekends later you have yourself a V8 commodore and you might even be able to break even if you part out the donor car on ebay. Getting that approved is a piece of piss compared with engineering a LS1 or a RB26. And if you really want massive amounts of power for an extra 5-7.5k you can get an ADR approved supercharger kit and be cranking out 230kw+ at the wheels. All legal no worries for less than 10k if you do the work yourself. Compared with an RB26 conversion its a bargain.

mad082 Grand Master

mad082

Posted
Posted
mate, if you go through with the conversion, let it be for only one reason:

to piss off all the one eyed skyline nut swingers :)

*pleasedontbanmekthnxbye*

+1

i've seen a 33 front bar on a commodore. brought a smile to my face. also the ease of fitting meant that a hsv front bar could be fitted to a 33. makes me wish i still had my 33 so i could put a commodore front bar on it to piss off all the people who think that skylines are the best car ever made, LOL.

Birds Grand Master

Birds

Posted
Posted

lol @ all the Commodore hate on here. Sometimes you lot are worse than the bogans who scream out riceboy everytime they see an import...

Anyway, these projects are usually undertaken by A.) people with too much money and not enough possessions, B.) people who know how to do most of the work themselves, or C.) idiots. If you're not one of these then don't do it...

Bolt on supercharger/turbocharger kit for the win, LS conversion for the win, smaller displacement high revving engine for the loss (of money).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • GTSBoy
      Another "where do these lines and plugs go" RB25DET question

      By GTSBoy · Posted

      4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • GTSBoy
      R34 GTR Seats / No longer reclining

      By GTSBoy · Posted

      Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • GTSBoy
      R34 Skyline climate control unit transistor

      By GTSBoy · Posted

      Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...