Jump to content
SAU Community

Recommended Posts

Well, having been scared away by prices of local semis....what is a decent track tire out of the US?

If you had to chose between

Kuhmo Ecsta V700

Kuhmo Victo Racer V700

Kuhmo Ecsta V710 (not sure i can drive on the streets with these bad boys?)

Hankook Ventus Z214

Hankook Ventus TD Z221 (they are not listed on their website but askign about availability along with A050)

Link to comment
https://www.sau.com.au/forums/topic/330062-track-tires-from-tyre-rack/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I havent used any of the other listed rubbers, but this is what I can say about the Ecsta's.

Have been involved with production car series for a bit now and never had any problems with them.

We ran a commo R8 on 2 sets for the recent 6hour at Sydney and they held up well. The drivers did bitch a little about them going off, but when your hauling a fat pig like an R8 on rubber that you qualified with, you expect a little fading after a couple of hours of racing.

They are a little suceptible to punctures on the saw toothed ripple strips on the inside of the tyre from what I have noticed.

Be warey of of pressures too. They blister quite easily too.

This is from what i have found through my experinces on a different car and set up to yours.

the kumho stuff is good, only about 1sec slower than dz03g/re55s. V70A is the current model but they still sell v700 in some sizes.

one big "thumbs up" for the kumho, they work well (best even) after the tread is gone (ie at and past the wear limiters). the serious guys buff them down to the wear limiters straight away, but I don't think it's worth the trouble on my budget.

the kumhos also want unusually high pressure. I run 42-44psi, the commodores run right up to 50psi for best performance. Yes that is crazy, and they got blow outs on the low profile type (35 and lower) at that pressure. but man they worked well.

haven't tried the hankook although they got good results at B24 and EC12 hours.

Kumho are a good price/performance mix, as are the toyos. If you need the fastest tyres you need to pay up for dunlops.

So Dunlops are quicker then AO50? It was hard to tell as i was not at Superlap, but surely if there was a time advantage to be running the Dunlops then people not tied up/associated with Advan would have run them.

The impression i got was the Sierra Sierra Evo were the odd ones out running Hankook whilst every other person ran the AO50s?

If i can confirm what the fastest tyre is i will grab a set as i wont be getting another chance to punch out a time for suite some time...so want to arm myself with the best tyres possible.

If i cant establish that then i think the Kuhmos for $1k sound like the best option. Who in NSW sells them? May not have to get them from the US!??!

re the yoko a050 being faster....I should have said I was talking about race use.

A050 only come in a medium compound (or super soft as used at superlap), not a hard, so they are not an option unless you can afford a set every track day.

full on super sprinting/superlap/whatever is a different story. soft tyres of any brand will outperform sensible/hard tyres from any other brand. eg I ran kumho wets once years ago and took the old blue gtst into the 1.10s at wakie. but who can afford new tyres every session?

re the yoko a050 being faster....I should have said I was talking about race use.

A050 only come in a medium compound (or super soft as used at superlap), not a hard, so they are not an option unless you can afford a set every track day.

full on super sprinting/superlap/whatever is a different story. soft tyres of any brand will outperform sensible/hard tyres from any other brand. eg I ran kumho wets once years ago and took the old blue gtst into the 1.10s at wakie. but who can afford new tyres every session?

What are you talking about?

  • 6 months later...

I don't know anyone that's used them. I think johnny at unique used either these or the similar looking hoosiers that are basically a slick with the minimum number of grooves required to meet DOT approval for road use. however I wouldn't try driving on the road with them, any state in aus and the police would be all over you apart from the fact that any wet weather driving and you'd find yourself in trouble.

on the track though they should be quite good but if you are driving in a class that requires road legal tyres check with the organisers first if they allow these tyres as some road legal classes exclude slicks like this that just have 2 grooves in them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...