Jump to content
SAU Community

Recommended Posts

Here is the link to Caltex planned rollout of E85:

http://www.caltex.com.au/ProductsAndServic...s/BioFuels.aspx

Marketing manager told me plan is have most running by late September, early October. So that might make it easier for some.

Engine bay looks almost stock, i don't want the look of pumps, lines, surge tanks in the boot.

The 740's are side feed Ash. From what you describe pump maybe close to a dangerous limit there.

If they can do 400rwkw, then thats not their limit :D

There would still be more had i'd imagine.

Hell stock GTR pumps will do 350-380 brand new

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You mentioned unigroup fixed your boost issues, what sort of power is it making now?

The car should be making in the region of 320-330awkw with the hardware you have currently, and if not, somethings not right and I would be addressing that before trying to chase more power through switching to E85

Yeah agree with that, should have shit in 320 just on pulp alone.

Don't wanna take the attention away from OP, but if I have a single 044 pump, and nismo 740's, at what rough power would the pump need to be upgraded on e85? Would it handle 350rwkw on an RB25?

Sorry I would search the upgrade threat, but god known nobody really posts their pumps in it lol

what was the boost issue? air leaks?

Sheesh a combo of three things... The first was one i suspected, t-bolt clamps were pinching where they tightened on the hard piping kit, the second was a tiny leak from a small tear in a vacuum line, and finally most important the actuators were not set up right. They had loose tension, were cracking too early and and unevenly across both turbos.

well, with your fuel pump, if you have 1000cc injectors, (minimum for e85 and half decent power) you need have a pump that can flow atleast 6l/min or whatever the total flow of the injectors are..

not hard to come close to max on 1000cc with e85

my evo [ i'm here as i want a r35 :] needed 1000cc injextors and twin pumps to get E85 setup .

is it worth it ? i got 301 atw on 98 v 330ish atw on E85 .. and i live near an E85 outlet but unless you cart around a 200ltr drum in the boot have found you really cant travel out of town on E85 map as theres little chance of getting E85 .

and getting out the lap top to change maps .. draining the tank ... is it worth it ? not sure unless youre very seriously tracking , really need the grunt and have a towcar full of drums . [ read a thread that E85 being supplied at some major tarmac events though ] . and if you can get a switch to change maps do it !

my evo [ i'm here as i want a r35 :] needed 1000cc injextors and twin pumps to get E85 setup .

is it worth it ? i got 301 atw on 98 v 330ish atw on E85 .. and i live near an E85 outlet but unless you cart around a 200ltr drum in the boot have found you really cant travel out of town on E85 map as theres little chance of getting E85 .

and getting out the lap top to change maps .. draining the tank ... is it worth it ? not sure unless youre very seriously tracking , really need the grunt and have a towcar full of drums . [ read a thread that E85 being supplied at some major tarmac events though ] . and if you can get a switch to change maps do it !

Most of us have 6 injectors, 610's should get me over 300kw. Twin pumps? With a good fuel system one 044 should do more than that.

I don't do that many K's so long distance for me is less than a tank. I can get over 400k's from 70L now. Easy switch over with the Emanage ultimate, dip switches on the front to swap back to 98.

A mate on here recently sold his 34 that had 368 at all 4 using GTSS' with 28ish psi on PULP - backed up by dyno's, insane lap times, etc. It was an over the top setup, and not a typical result, but close to the 400 i guess..

Anyhow i made my decision, 1000's going in, retune on PULP in the short term with plans for E85 towards end of the year. Will post results.

Hey guys, been reading this for a while im sort of confused,

Ive currently got 251kws my mods are , PFC, 740cc , walbro fuel pump, highflow turbo etc... Can i use E85 + bp 98? 50% 50% , would i need to change anything from my fuel setup? I just want my engine to run safe...

Hey guys, been reading this for a while im sort of confused,

Ive currently got 251kws my mods are , PFC, 740cc , walbro fuel pump, highflow turbo etc... Can i use E85 + bp 98? 50% 50% , would i need to change anything from my fuel setup? I just want my engine to run safe...

740's will basically get you to 400rwkw on PULP.

Easily enough for E85 with your setup.

A mate on here recently sold his 34 that had 368 at all 4 using GTSS' with 28ish psi on PULP - backed up by dyno's, insane lap times, etc. It was an over the top setup, and not a typical result, but close to the 400 i guess..

Anyhow i made my decision, 1000's going in, retune on PULP in the short term with plans for E85 towards end of the year. Will post results.

So you want to put 28psi through a standard bottem end, good luck with that.. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...