Jump to content
SAU Community

Recommended Posts

Here is the link to Caltex planned rollout of E85:

http://www.caltex.com.au/ProductsAndServic...s/BioFuels.aspx

Marketing manager told me plan is have most running by late September, early October. So that might make it easier for some.

Engine bay looks almost stock, i don't want the look of pumps, lines, surge tanks in the boot.

The 740's are side feed Ash. From what you describe pump maybe close to a dangerous limit there.

If they can do 400rwkw, then thats not their limit :D

There would still be more had i'd imagine.

Hell stock GTR pumps will do 350-380 brand new

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You mentioned unigroup fixed your boost issues, what sort of power is it making now?

The car should be making in the region of 320-330awkw with the hardware you have currently, and if not, somethings not right and I would be addressing that before trying to chase more power through switching to E85

Yeah agree with that, should have shit in 320 just on pulp alone.

Don't wanna take the attention away from OP, but if I have a single 044 pump, and nismo 740's, at what rough power would the pump need to be upgraded on e85? Would it handle 350rwkw on an RB25?

Sorry I would search the upgrade threat, but god known nobody really posts their pumps in it lol

what was the boost issue? air leaks?

Sheesh a combo of three things... The first was one i suspected, t-bolt clamps were pinching where they tightened on the hard piping kit, the second was a tiny leak from a small tear in a vacuum line, and finally most important the actuators were not set up right. They had loose tension, were cracking too early and and unevenly across both turbos.

well, with your fuel pump, if you have 1000cc injectors, (minimum for e85 and half decent power) you need have a pump that can flow atleast 6l/min or whatever the total flow of the injectors are..

not hard to come close to max on 1000cc with e85

my evo [ i'm here as i want a r35 :] needed 1000cc injextors and twin pumps to get E85 setup .

is it worth it ? i got 301 atw on 98 v 330ish atw on E85 .. and i live near an E85 outlet but unless you cart around a 200ltr drum in the boot have found you really cant travel out of town on E85 map as theres little chance of getting E85 .

and getting out the lap top to change maps .. draining the tank ... is it worth it ? not sure unless youre very seriously tracking , really need the grunt and have a towcar full of drums . [ read a thread that E85 being supplied at some major tarmac events though ] . and if you can get a switch to change maps do it !

my evo [ i'm here as i want a r35 :] needed 1000cc injextors and twin pumps to get E85 setup .

is it worth it ? i got 301 atw on 98 v 330ish atw on E85 .. and i live near an E85 outlet but unless you cart around a 200ltr drum in the boot have found you really cant travel out of town on E85 map as theres little chance of getting E85 .

and getting out the lap top to change maps .. draining the tank ... is it worth it ? not sure unless youre very seriously tracking , really need the grunt and have a towcar full of drums . [ read a thread that E85 being supplied at some major tarmac events though ] . and if you can get a switch to change maps do it !

Most of us have 6 injectors, 610's should get me over 300kw. Twin pumps? With a good fuel system one 044 should do more than that.

I don't do that many K's so long distance for me is less than a tank. I can get over 400k's from 70L now. Easy switch over with the Emanage ultimate, dip switches on the front to swap back to 98.

A mate on here recently sold his 34 that had 368 at all 4 using GTSS' with 28ish psi on PULP - backed up by dyno's, insane lap times, etc. It was an over the top setup, and not a typical result, but close to the 400 i guess..

Anyhow i made my decision, 1000's going in, retune on PULP in the short term with plans for E85 towards end of the year. Will post results.

Hey guys, been reading this for a while im sort of confused,

Ive currently got 251kws my mods are , PFC, 740cc , walbro fuel pump, highflow turbo etc... Can i use E85 + bp 98? 50% 50% , would i need to change anything from my fuel setup? I just want my engine to run safe...

Hey guys, been reading this for a while im sort of confused,

Ive currently got 251kws my mods are , PFC, 740cc , walbro fuel pump, highflow turbo etc... Can i use E85 + bp 98? 50% 50% , would i need to change anything from my fuel setup? I just want my engine to run safe...

740's will basically get you to 400rwkw on PULP.

Easily enough for E85 with your setup.

A mate on here recently sold his 34 that had 368 at all 4 using GTSS' with 28ish psi on PULP - backed up by dyno's, insane lap times, etc. It was an over the top setup, and not a typical result, but close to the 400 i guess..

Anyhow i made my decision, 1000's going in, retune on PULP in the short term with plans for E85 towards end of the year. Will post results.

So you want to put 28psi through a standard bottem end, good luck with that.. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...