Jump to content
SAU Community

Recommended Posts

Well another bad night on the roads with yet another fatal and the Major contributing factor SPEED.

Would you be able to explain the accident and why you considered the major factor to be speed? Is there a category for driver error. A terrible driver in a piece of crap car can be dangerous doing the speed limit.

It just seems to me that speed is the default reason for every accident.

  • Replies 167
  • Created
  • Last Reply

Top Posters In This Topic

What a crock. The problem is not people who are 0.04. The problem is people who break the current laws are not punished harshly enough. Especially the serious repeat offenders.

How is blood alcohol limit a cops word??

Agree. I think Brett was referring to the hoon laws as far as a cop's word goes.

BAC is useless anyway. I would never trust myself to drive at 0.05. I know the breathos at Crown aren't fantastic, but I blew 0.06 on one of them, a couple of hours after my last drink...still in a state where I would probably fall off a bicycle. Some people can't take their alcohol as well as others regardless of percentage. Bring back ye olde sobriety tests...

Speed is still a determining factor in an accident if your car is in a poor state, you're still driving too fast for it even if you're under the legal speed limit. It's also up to you as a driver to identify unsafe conditions and adjust speed accordingly to avoid an accident / spin out.

but AGAIN THERE IS NO CONTEXT TO THE FACTS THAT WERE GIVEN IN THE ORIGINAL POST.

Graeme, feel free to elaborate on teh story?

Could have been someone who'd had a big night and woken up with a hangover thinking they would be alright to drive etc etc.

I was refering to the facts that were put forward in his original post, you could see there wasn't going to be any extra facts otherwise I'm should he wouldn't have left them out.

in vic sympathy from judges is easy, if ya grew up tough or ya parents divorced you can pretty much get away with murder

True but the Victorian courts are WAY to soft. I know someone that's been in a bit of trouble (one of those people you'd rather now know) and he was saying that Victoria is the best state to commit a crime, and the NT and QLD are the states to avoid.

since i would like to see the limit be .00 for everyone i think anything over .05 should be impounded, and not just for 48hrs, for the whole time they have lost there license, also they have to pay storage if they want to keep it, if they dont want to keep it they sign it over and it gets auctioned off and the proceeds go to victims of crime fund or something like that.

Instead they bring in laws where the only evidence needed is a cops word which is wide open for abuse and your car gets impounded.

I understand the point you're trying to make, however It would be impossible to achieve that. Bodies metabolize alcohol at different rates based on height/weight/fat %/gender

and lots of things contain small amounts of alcohol. Lots of medications,cherry ripes, mouthwash (it's a cleansing agent, lots of them contain ethanol/alcohol)

and as for people who wake up with residual alcohol in their system, someone I know had a drinking session with my partner, and wasn't back to .00 til 4pm that afternoon (he'd stopped drinking about 3 or 4 am) of course he couldn't start his car until then because he had an inter-lock.

I understand what you're saying about cops targeting people driving certain cars (I get harassed all the time...and my car is 100% stock, but I'm from Hicksville) however I believe there is a lot more to being a cop then "look a Skyline....let's pull it over...."you were going 100 in a 60 zone"..."no officer I was going 55" that's not to say that there is some people that don't take it to far.

Birds & Graeme - People who drink drive are the ones that make my job shit. Poeple with acquired brain injuries (ABI) that end up in ABI units or in physical rehab centres or the victims of drink drivers. They make life difficult for the cops, the paramedics, the nurses and the doctors. not to mention the family. I know I don't want to sew some idiot shut after he has written himself and his car off, I don't get paid enough for that!

Richar- I don't. I drive like I own a Corolla :) I get what you're saying but as Charlene said "Speeding on the other hand, still stupid, but slightly controllable in certain instances." (I couldn't have said that better)

I don't get behind the wheel of my car and flog it, the most I ever sit on (when not passing a truck) is 5-7kmh over the speed limit on the freeway, and I believe you get a 3kmh buffer on the freeway, and I know my car is capable of more then that. My boyfriend had a 89 Mitsubishi TP Magna when he first got his license (we had it up til Jan this year) and that reached 150 on flat ground

Reason I dislike 0.00 is because of the next morning. Its so hard to judge whether you're sober and just hungover or still slightly under the influence. The 0.05 rule would be nice in those cases, damn P plates.

Well another bad night on the roads with yet another fatal and the Major contributing factor SPEED. RIP and feel for all those involved.

What were the other contributing factors?

Drink driving also?

If so, am I seeing a root cause in all of this?

I don't know if alcohol/drugs were involved. I heard that the car was possibly drag racing and lost control and crashed into a large tree. The damage to the car clearly showed it was a very high speed impact crash. I can't comment any further on that as matter ongoing and under investigation.

I agree that XPCA (drink driving) should stay at 0.05 and not 0.00. Nothing wrong with glass of wine with dinner etc and people may have some in system the next morning after big night.

I don't think it should be higher as I have seen lots of people blow 0.06 to 0.08 that in my opinion were wasted and other's blow 0.10 and appear as though they haven't even had a drink.

Are you a nurse slinky? Nurses never get paid enough anyway, and they're practically doctors lol.

Yeah Birds I'm a Nurse, and no we don't get paid no where near enough, for the amount of training we do....and all the yummy things that come along with it.

lol one of my girls is a nurse, I don't know how she does it. I'm always hearing stories involving bodily fluids and patients crashing.

On the plus side it's handy having a portable hospital around :)

True but the Victorian courts are WAY to soft. I know someone that's been in a bit of trouble (one of those people you'd rather now know) and he was saying that Victoria is the best state to commit a crime, and the NT and QLD are the states to avoid.

that was my point.

What were the other contributing factors?

Drink driving also?

If so, am I seeing a root cause in all of this?

speeding is the cause of everything wrong with the world man, hasn't the TAC/ government taught you anything..

lol one of my girls is a nurse, I don't know how she does it. I'm always hearing stories involving bodily fluids and patients crashing.

On the plus side it's handy having a portable hospital around :)

how many you got pimp?

haha

speeding is the cause of everything wrong with the world man, hasn't the TAC/ government taught you anything..

exactly. never mind that the guy was probably high as a kite driving some old shitbox.

how someone can lose it so badly giving it a punt in a straight line is beyond me :nyaanyaa:

that was my point.

speeding is the cause of everything wrong with the world man, hasn't the TAC/ government taught you anything..

.

It probably was your point Alex, but my point was that the judiciary system in Victoria is piss weak, and it cracks down on the wrong stuff.

Speeding is a real issue...it's not THE biggest issue, but it's still something people need to be mindful of. Honestly for me DUI is a much bigger issue. I'd rather be in the car with someone speeding then someone that's off their face on one thing or another

Edited by slinky-minky
I don't know if alcohol/drugs were involved. I heard that the car was possibly drag racing and lost control and crashed into a large tree. The damage to the car clearly showed it was a very high speed impact crash. I can't comment any further on that as matter ongoing and under investigation.

I agree that XPCA (drink driving) should stay at 0.05 and not 0.00. Nothing wrong with glass of wine with dinner etc and people may have some in system the next morning after big night.

I don't think it should be higher as I have seen lots of people blow 0.06 to 0.08 that in my opinion were wasted and other's blow 0.10 and appear as though they haven't even had a drink.

Understandable that you cant comment further but without the full details it is somewhat hard to know exactly what went on even though from your description is looks to be very obvious. Please excuse the doubt though as police have been providing miss leading causes for accidents which dissagres with experts (monash accident research center) even in clear cut cases. I have posted of a specific example on which was a failure to give way was the cause yet police deemed cause of accident to be speed which I wont bother to post again.

Unless the person has a medical condition such as diabeties or some form of alcohol allergy they will be fine to drive beyond at and beyond 0.05. About 9 years ago I took part in testing using simulator tests at different BAC readings. I don't remember all the details/results of other people but I was average and I was unaffected in my opinion back up by simulation results until about 0.08, once over 0.1 though it was a very quick decline.

It is impossible to have different BAC limit for each person and there has to be a line and 0.05 is what we have. Whilst some other countries the line is at 0.08 I'm not unhappy at all with 0.05 but it will surprise most people how quickly they will get there.

Lol, the ex girlf is a nurse too, she did my stitches and local anesthetic injection during my lymph node removal op...

If you think nurses are underpaid here, back in singapore, nurses work 5 day weeks, 10 hour shifts, and get only 2grand a month, or even less. Thats bullshit pay..

I think it ain't half bad here, its still low for the amount of crap training you guys have to go through, and the amount of stuff you have to remember, no wonder everywhere is experiencing a shortage of nurses, the pay is hardly enough!

Stupid biatch last week down Jackson's Road Mulgrave at night. Looked like P plater in Holden Barina. Door not closed properly, so interior light was shining on her holding a mobile phone on her ear talking, while she proceeds to weave, tailgate, and overtake people at 80km/h in a 60km/h zone with her friend next to her. Not the worst but definately one of the stupidest.

On the talk of Drink Driving just saw on Ch 10 news that 8 police have been charged with it in last 2 months and 3 got fired as a result. I think the total was 198 since 2000.

Pure stupidity IMO and got what they deserve. Shows the type of people we are recruiting.

On the talk of Drink Driving just saw on Ch 10 news that 8 police have been charged with it in last 2 months and 3 got fired as a result. I think the total was 198 since 2000.

Pure stupidity IMO and got what they deserve. Shows the type of people we are recruiting.

Just shows you guys aren't immune to it either. You guys can loose your license as well.

Xalmon- stuff that! I wouldn't work those hours for less then $500 a week, and it's not just the hours it's the personal risk that you put yourself, risking exposure to diseases and general gross-ness

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...