Jump to content
SAU Community

Recommended Posts

started building my car 4 years ago and have been to hell and back with a few shops but finally ended up at a shop i was happy with.

my 4wd wasnt working so i had a full re wire and whatever they did to sort it out. at that time the car was running a 2.7 jun stroker with t88-38gk making 410awkw @ 21psi or there abouts

so being in the workshop i decided to change my plans from street/drag to street/time attack/all rounder, so i made the following changes

- os giken 3L stroker w/ quad plate

- brand new race spec head

- t51r kai bb turbo kit

- hi octane dry sump setup

- ALOT of motec goodness

atm, some basic specs are

- all of the above plus

- ppg 5 speed gearbox

- trust peII 4inch exhaust str8 thru single rear muffler

- 1200hp fuel setup (std fuel tank) 3 pumps, surge tank etc

- motec m800

- motec dash logger

- motec shift light module

- motec knock control

- motec CDI ignition

- defi everything guages

- hypertune plenum, throttle body, n other fabrication

- 150mm greddy intercooler single entry

- tein coil overs with adjustable everything arms/rods/ bla bla bla

- r33 gtr brembo brakes

- nismo gt 2 way rear diff

- tomei front diff

- 19x10 racing harts

- 2x bride cuga seats

- full suede w/bride trim

- dspeed clear corners

- f*k load of other stuff i cant remember

NOW TO THE FUN (not) AND ONCE AGAIN, TIME CONSUMING PART!! which will prob take me a good 6 months depending on work and funds.

i found a r32 gtr rolling shell which ill build up brand new then swap my running gear into it and sell off the old car as a roller.

it will be fully spot welded and stripped and painted with only a dash and 2 front sits with minimal interior, all new rubbers and moulds throughout

its going my favourite colour!!!!!! WHITE AS WHITE CAN BE!!!

new parts/things that im planning to add to the new car

- veilside wide fender kit

- frp front bar with integrated front lip w/ n1 vents slightly modified to fit widebody (have)

- carbon abflug front diffuser slightly modified to fit widebody (have)

- carbon top secret rear diffuser (have)

- forgeline zx3r 18x11 +15 front and -10 rear (21lbs each = 9.5kg!!) (ordered)

- volk te37 superlap 19x10.5 for street (ordered)

- cams/ andra spec 4 point with side intrusion bolt in for now, maybe weld in if i go crazy, wanna keep it street still!

- ap racing custom brake kit 6 piston cp5555 w/ 380x36 front rotor and ap racing GTR rear kit

- dry carbon boot and bonnet (already have)

- dry carbon doors (for the track, std ones for the street)

- dry carbon rear wing

- carbon dash and door trims

- carbon interior parts (custom a&b pillar, rear upper and lower trims near the seat to make it look tidy and a false carbon rear seat similar to the origin ones offered for s13/180sx for the street so it doesnt look so bare) (ALMOST COMPLETE!!)

- ikeya everything suspension arms n etc (ordered)

- new coilovers - still undecided on which ones............

- polycarbonate windows, std front screen (ordered)

- supermade headlight covers with n1 headlights and hid kit

- recaro fixed back for track and 2x recaro sportster CS for street (over bride plus recaro = ADR regs)

MANY MANY HOURS OF PAIN AND HARD WORK!!!

i was thinkin about doin a r34 gtr but not only have i had one of the best ones out there, i love the 32 shape and its becoming vintage as every year passes :D

heres some pics of what it looks like now and the roller ive had sitting in the back yard for an eternity which will start gettin worked on next week. the complete strippping of it will begin and ready for paint.

appreciate ALL feedback and comments and criticism whatever it may be :P

current look

gtr2.jpg

engine bay

32.jpg

interior

Image009-2.jpg

Image008-1.jpg

new forgeline wheels

forgeline.jpg

gtr roller

Image019-1.jpg

Image018-1.jpg

Image023.jpg

thats all i got for now, didnt realise its taken me over an hour to do this haha

Link to comment
https://www.sau.com.au/forums/topic/335704-r32-gtr-time-attack-street-build-up/
Share on other sites

t51r kai is fine, boost comes on early and just rips. many jap time attack cars run t88's so im sure this will do just fine :) its not a dedicated car so to speak so i could prob get better times but then i lose too end which i want for wen i take it to drags n the like, its an all rounder :P im not using that shell anymore, i sold it, i found myself a cheap complete roller which will be a better base ill keep things updated as i go along and get things happening! tryin to get some sponsors on board for a few things

sure is, gotta get stripping and rub the car back so we can fit the kitup hopefully next week and cut the rear fenders,

cage is probably about 3-4 weeks away before it can go in 2 get done, 6 point fixed, cams n andra teched and modplated in qld!!! love it

novake,

other than f**king awesome there isnt much i can say brother lol awesome build dude. i look forward to seeing it grow haha

just a question though, y did u choose to get the kai instead of the spl turbo and also i see u went the carbon dash ah, nice man. im still looking for one for mine. there hard to find though lol.

hey julz, kai bb = less lag, and better suited for wat i wanna do, it will make close to 500awkw on moderate boost on pump and even more on e85 :( and boost comes on str8 away and huge torque with this combo! its crazy! i didnt get to work on it last week too busy, but will start on wednesday :down:

  • 3 weeks later...

hows it coming novak.

ive changed from a gt42 to a to4z in my engine.

and the door trims are getting fitted up next week, took me ages to find someone i can trust to stip my oem doors and fit all the switches and handles to the sunline door cards...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...