Jump to content
SAU Community

Oil Pressure When Braking


gandal88
 Share

Recommended Posts

hi guys i bought my 94 r33 rb20de 3 days ago and realized under heavy braking that my oil light comes on and i my pressure gauge drops to 0 i have no idea if this is the normal or not but if anyone could enlighten me or give me a few things to check out that would be a great help and i would appreciate it immensely cheers jamie

  • Nope 1
Link to comment
Share on other sites

Is it really a n/a rb20 in a 33? i find that hard to believe unless someone corrects me?

if so you have close to the worst combination of car and motor, the only thing worse you could have is the single cam rb20e.

+1 as said, check your oil. Did the car have an inspection before you bought it? is the oil pump going ok? has the motor been replaced with an rb20 for some reason?

Link to comment
Share on other sites

Ive heard of RB20DE R33's but yeah the RB25 is favoured over the 20 for obvious reasons

OP: Check your oil level, if thats fine I'd say its a dodgy bit of wiring to your oil pressure sender or your oil pressure sender itself might be broken

Link to comment
Share on other sites

Actually I think you are right, only the RB20E was available...even gayer lol. I swear I remember reading they were not approved to bring into the country but some still got in.

Personal import maybe....

Link to comment
Share on other sites

The oil light is of the "Oh SHIT!!!!" type. If it comes on, then you have no oil pressure, and that is NOT good for the engine..

One way to avoid it is to not brake so heavily that it comes on. One other method is to change the oil.

Link to comment
Share on other sites

  • 1 month later...

check the sump is not damaged, if its been punched up it may have damaged the pick up tube higher up, causing it to pull air on braking, even when your oil level is correct. can test this by overfilling oil by a litre. sr20s common for it.

Link to comment
Share on other sites

  • 2 weeks later...

You could get a skyline with a CA18i in Japan, yes thats right, a 1.8 litre SINGLE CAM.

No idea why anyone would get it, but I have seen photo evidence of such a beast.

Regarding the oil problem all you can really do is overfill the engine slightly, I believe that the higher and softer the suspension the worse it is as well (more weight shift).

edit: The car is a R32 GXi and it makes 68kw at the fly, f**king woeful.

edit2: Its not even proper injection, its single point tb injection ahaha

Edited by Rolls
Link to comment
Share on other sites

  • 1 month later...

I've seen this once when braking hard, thankfully I had already put the clutch in and the revs had dropped to about 1500rpm when the oil light flickered on. My oil level was about midway between L and H on the dipstick.

FWIW I always put 5L of oil in when I do the change, preferably the oil is slightly above the H mark. There's a kink in the dipstick and I figure that's the "knob end" warning mark that you'll end up crank slapping the oil if you fill it past that, mine is always just below that point.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...