Jump to content
SAU Community

Recommended Posts

Hey guys,

Just thought we'd give you a look at what we plan to release later this month.

Our 1000hp R32 GT-R intank kit is in the final testing stages now.

It's completely made here in Australia of CNC billet aluminium.

Includes all fittings, relay, fuel pumps, filters, Gates submersible hose

Say goodbye to fuel odour in the cabin, hello to quiet operation and of course no one will even know you have it.

Simply bolt it in and off you go!

It will be priced at $1350

Also in the pipework we have the same kit to suit R33 GT-R, R34 GT-R, R33 GTS-T, S13, S14, S15, 2001 onwards WRX, FD RX-7

2m6ri0w.jpg

www.powertune.com.au

2u5yt21.jpg

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

It will be exactly the same as factory, so ultimately for a circuit car you would still require a surge tank, but for the majority of big powered street cars, this will do the job and saves a lot of stuffing around.

for 1300 bucks it would want to do everything, I can see $300 worth of fuel pumps, the hose would cost 20 bucks and a bit of machine work.

I feel its over priced, when for 1300 bucks I could have 2 044 pumps (which would actually flow 1000hp worth of fuel), braided lines everywhere and a good surge tank.

Ps. not sayings its shit, its looks mint! but im not sure a single 5/16" fuel line to the rail and 2 walbros will support 1000hp

Its actually quite reasonably priced in my opinion. That part of my fuel system cost alot more than that, seeing how its all custom.

This is a straight bolt on solution with all the guess work taken out.

X2. Its neither an arse nor an elbow. Not suited to track work and way too pricey for what it is for a street car.

What he said, Im looking to upgrade fueling, but couldnt you add a surge tank in the mix, not many 1000hp street cars but lots of lower power cars that see the track/drags.

I may buy something like this if it could eliminate surge and supply ample fuel and still be all hidden away in a tank.

not many 1000hp street cars but lots of lower power cars that see the track/drags.

What he said. Looks like a nice, well engineered kit. But what market, BIGhp that doesnt get raced on low fuel as not o carry needless weight?!?!?! Sure you will still sell plenty as a well engineered fuel system saves a lot of labour costs

Edited by Roy

i am a week or so from doing a surge system , and in my opinion ( that's right mine) its too costly for what it is , i rekon with a few hours i could knock that up and add 2 bosch 040's and away u go.

and just for example .

surge tank with mounting brackets for 2 bosch 044's : $180 au devilered (at this price hardly worth making my own)

2 bosch 044's 200 bucks each

few ods and ends

+ this actually stops surge issues , i cant see how that system will

so well under 800 bucks u have a fuel system thats rated to well over 1000+ hp

not taking credit away it is a good idea, but i just don't think it would a big seller

Edited by yogibear
What he said. Looks like a nice, well engineered kit. But what market, BIGhp that doesnt get raced on low fuel as not o carry needless weight?!?!?! Sure you will still sell plenty as a well engineered fuel system saves a lot of labour costs

c'mon Roy, 90% of big hp cars don't see the race track at all, 9% see it on the internet only. I guess 1% may visit a track once. 3 big hp GTRs in Aus regularly do track work.

so there is a market for this.

And you can be sure that billet fitting for the tank lid that seals properly costs a mint to produce. Looks excellent and much safer than the dodgy fittings most people use

On the positive side it looks well made..but does not address the fuel surge issues as already said & it is overpriced for what it is.

If the price was considerably lower it probably would be a fast selling item ..im sure people would overlook the surge side of things not being addressed if it

allowed them to supply the fuel demands needed at a reasonable price.

On the positive side it looks well made..but does not address the fuel surge issues as already said & it is overpriced for what it is.

If the price was considerably lower it probably would be a fast selling item ..im sure people would overlook the surge side of things not being addressed if it

allowed them to supply the fuel demands needed at a reasonable price.

Exactly, if it were well under 1000 bucks It would sell like hotcakes, Hell I would have been asking about them for R33s if I still had mine.

It looks really good but like everyone else I'd be worried about the surging issues as my 33 is used for drift. May be interested once more details are released as was looking at going bigger pumps etc as i'm looking at changing to E85 and aiming for 400+rwkw.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...