Jump to content
SAU Community

Recommended Posts

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i would think a brake upgrade should be a bit higher up the list :\

EDIT: 2,000 posts!

Yeh would be - but the GT-V runs the large stock GTt brakes whick are upto the task. A set of good brake pads is a must.

I'm trying to keep the budget small

I think one major thing that everyone has forgotten about motorsport cars:

Fast

Cheap

Reliable

Pick two.. you can have all of them..

Bear in mind alot of the cars mentioned are getting very old and likely thrashed within an inch of their lives. Its best to gt a car that hasn't been in the hands of several P platers already.. you will spend all your time and money working on it, rather than driving it.

Find an MX5 1.8L from an old fat bawld man who has woken up from their middle age crisis and is selling his MX5.

Find a BMW E30 that has been in the family for ages but rarely driven.

EK/EG honda

SSS Pulsar - Look up SR16VE N1 - and buy one!.. then drop in an SR20VET out of the Jap spec Xtrail.

or just a SSS pulsar with a sr20ve conversion in it (easier than trying to find a N1 VZR), or just a standard VZR pulsar. even with the standard sr20de in the the SSS pulsars go well. just put on a set of extractors and a decent exhaust and they rev out nicely. a set of sway bars to make them handle better (make it get a bit of lift off oversteer) and a decent set of brakepads. there are also a few good brake upgrades for them too.

I think one major thing that everyone has forgotten about motorsport cars:

Fast

Cheap

Reliable

Pick two.. you can have all of them..

Bear in mind alot of the cars mentioned are getting very old and likely thrashed within an inch of their lives. Its best to gt a car that hasn't been in the hands of several P platers already.. you will spend all your time and money working on it, rather than driving it.

Find an MX5 1.8L from an old fat bawld man who has woken up from their middle age crisis and is selling his MX5.

Find a BMW E30 that has been in the family for ages but rarely driven.

EK/EG honda

SSS Pulsar - Look up SR16VE N1 - and buy one!.. then drop in an SR20VET out of the Jap spec Xtrail.

IMHO - I'd try to stay clear of european cars - they would be quite pricey to service considering the target market are P platers this "could" pose an issue of expensive running cost.

Mk IV - Supra SZ-R would be nice:

- It has a 6 speed getrag manual

- n/a

- LSD

- Big brakes

I didnt say mx5 or s13 cause the op said power... lolz

Monetary figure is important here... Best bet is R32/R33/R34 RB25DE or a NA Supra if you wanted to bring common sense into the equation...

Edited by Ten Four
IMHO - I'd try to stay clear of european cars - they would be quite pricey to service considering the target market are P platers this "could" pose an issue of expensive running cost.

Id be thinking if your building a car for the track, you can service it yourself..

Id be thinking if your building a car for the track, you can service it yourself..

unless you are going to make the parts yourself it is still going to be more expensive to service.

if you want to get picky, a lot of cars would get ruled out simply on the basis that you aren't supposed to have engine mods on your P plates so that pretty much rules out any suggestion has a engine transplant.

The whole point of the topic it has to be P plate legal - having engine swaps or major engine upgrades like that are not allowed on P plate restrictions.

KE70 with a 4age will be ok too - but not sure about the legalities for a P plater.

*puts on flame suit*

If it comes to power and budget.

How about a V6 manual VS acclaim (it has IRS compared to the basic commodore).

- external oil cooler

- larger radiator

- Plenum spacer

- High flow filter and zorst

- Suspension upgrade

- Bigger brakes from the VT

- slicks/semi slicks

- LSD

- Lower geared diff for faster accel.

- Some form of body brace/cage - the VB to VS bodies suffer from flexing

MX5 will be quicker than 99% of the NA skylines and supras around a track.

killerwasps aren't everything

Stock for stock?

Highly doubt it on a track, unless we're talking about some track without straights.. FWIW, NA 6 speed JZA80s can manage 0-100 in 6secs.

Edited by Ten Four

lol silly flamin mongrels.

If you're seriously going to track it, get a dedicated track car, and a VN daily or something, and not have to worry about spending a gagillion dollars to go fast, or about driving a fagmobile.

Could always get a Datto of some sort and hot it up, 1200's are worth a fortune for what they are, but go fast parts are cheap if you do it all yourself

Stock for stock?

Highly doubt it on a track, unless we're talking about some track without straights.. FWIW, NA 6 speed JZA80s can manage 0-100 in 6secs.

a supra might have more power but it is also in a platform that has failed and failed again and that is from my experience at QR which is one of the more favourable tracks in aus for a car that is all power no handling

*puts on flame suit*

If it comes to power and budget.

How about a V6 manual VS acclaim (it has IRS compared to the basic commodore).

- external oil cooler

- larger radiator

- Plenum spacer

- High flow filter and zorst

- Suspension upgrade

- Bigger brakes from the VT

- slicks/semi slicks

- LSD

- Lower geared diff for faster accel.

- Some form of body brace/cage - the VB to VS bodies suffer from flexing

*with extinguisher and fire blanket handy...

Lol, as much as commodores are dirty pushrod Bogan boats, it is a pretty good suggestion. These have the best power to weight out of pretty much all the commodores (light vs chassis, decent ecotec motor) and mod pretty well. I ran a flat 15 in a mildly modded VS (chip, silent lukey exhaust and pod) which had 115kW at the wheels (mates car). He then combined that with a bored out intake (home job, took the mouth behind the tb it thin as it would go and roller rockers and saw 125kW atw. If you were to expand upon that and pull off the (disgusting cast iron) heads and give them a fair shave, manifold spacer, mild cam and some better management and I reckon you could get ~ 100kW per tonne. And that’s without mentioning how easy it is to stroke those engines (which popo would never know about).

An IRS model with HD sways, good springs and excellent shocks with some wide wheels and good tyres (easy get some 18x8.5's or something from a newer model without attracting attention), as mentioned the VT-VY brake upgrade and fit an LSD and don’t forget some 3.7/3.9 diff gears, it would be a pretty good daily and track car, and quite quick off the line.

But very very bland, and boring, and still quite sloppy compared to an import, anything early or Australian most likely will be though... I’m a big fan of R31’s, and when I was on my P’s the power was good enough, but if you’re after numbers they’re not overly ideal, and the VS mentioned above decimated me time in my original rb30e (with 108 at the treads, exhaust/timing/XF/CAI).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...