Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Nah no realy benefit, remote turbo set-ups are usually done due to spacing constraints.

Ends up being pretty laggy, but makes similar powar. Also they dont usually need intercoolers cos the piping is soo long, the air looses all its heat on the way back to the motor.

That is a f**king sick car. Sounds porn, looks amazing.

:drool:

Nah no realy benefit, remote turbo set-ups are usually done due to spacing constraints.

Ends up being pretty laggy, but makes similar powar. Also they dont usually need intercoolers cos the piping is soo long, the air looses all its heat on the way back to the motor.

That is a f**king sick car. Sounds porn, looks amazing.

:drool:

Exactly what I was thinking.

The turbo housing should also act as an intercooler as the outside air is blowing onto it.

Instant cooling...

+ this setup seems quite popular in the USA.

Im still not a believer of such setups.

One dude in FI has something similar ATM ("STS" thread)... But with ALL that extra pipe work, there MUST be some delay & lag on that set-up over conventional stuff.

Also add in the extra weight, weight balance all that pipe would come into etc etc.

I think the fact they all usually do it with resonable cube V8's kinda negates it a bit - but you can hear from the video how long the turbos take to get on song

Hence, i ain't convinced.

Very sexy car though.

Im still not a believer of such setups.

One dude in FI has something similar ATM ("STS" thread)... But with ALL that extra pipe work, there MUST be some delay & lag on that set-up over conventional stuff.

Also add in the extra weight, weight balance all that pipe would come into etc etc.

I think the fact they all usually do it with resonable cube V8's kinda negates it a bit - but you can hear from the video how long the turbos take to get on song

Hence, i ain't convinced.

Very sexy car though.

Yeah not exactly responsive, especially for such small turbos.

doesn't matter on that setup though as he's got high comp Lexus V8 power... the turbos would just give more torque/power and fatten out the midrange and top end... he's only running 5psi if I heard correctly

sweet car... pity about the gearbox, sounds slushy changing gears... a manual would be so nice

doesn't matter on that setup though as he's got high comp Lexus V8 power... the turbos would just give more torque/power and fatten out the midrange and top end... he's only running 5psi if I heard correctly

sweet car... pity about the gearbox, sounds slushy changing gears... a manual would be so nice

Yeah i agree with that, still would be much better with a "real" turbo setup though, If it were mine I would just leave it Aspirated.

V160 Conversion wouldn't be too hard they are just a Fat version of an IS250 and bell housings are avaliable to suit the UZ motor

the adgantage is that you don't have to go making up new manifolds, trying to squeeze turbos into tight engine bays with v8 motors, and on NA motors lag won't be that much of an issue. because you don't really need to run much in the way of intercoolers and the turbos aren't massive. you will have some lag though obviously.

an advantage though, epic turbo spool noise coming out the exhaust as it doesn't have to pass through any mufflers after the turbo.

the adgantage is that you don't have to go making up new manifolds, trying to squeeze turbos into tight engine bays with v8 motors, and on NA motors lag won't be that much of an issue. because you don't really need to run much in the way of intercoolers and the turbos aren't massive. you will have some lag though obviously.

an advantage though, epic turbo spool noise coming out the exhaust as it doesn't have to pass through any mufflers after the turbo.

I have been thinking about doing this to my 5ltr NC fairlane for those exact reasons.

H O M O

he def needs more shit carbon everywhere

and shoulda just bought one of these

http://www.turbowhistler.net/

sounds the same

having the turbo in the back seat is plausable . http://speedhunters.com/archive/2010/07/20...k-pink-s14.aspx

80% of the energy the turbo uses comes from exhaust heat

how hot is your manifold ? vs how hot is the exhaust gas at the tip ? you do the math

Edited by lachlanw

how does the turbo use heat? the turbo uses exhaust gas flow. sure the exhaust gas has less density when it is hotter, therefore being a larger volume, but if you take this into account with exhaust size and turbo size you could balance things out a bit. plus there is the advantge of the fact that a byproduct of the turbo is heat, which then reduces power, so having it further away reduces the power loss through hotter intake temps and restrictive intercoolers.

not goin to argue how a turbo works . go read a book instead of the internet

on another note of someone came to me and had lots of money and wanted this id be happy to do it and he is obvoiusly happy with it

there was a huge debate on this on NS a while back. short answer, no.

-increased intercooler piping thus more lag.

-increased risk of turbo damage.

-decreased life span of the turbo. whenever it rains the turbo will be sprayed with water. since the inside of the exhaust hosing will be around 900c yet the outside is being sprayed with cool water, the great temperature difference is likely to cause cracking.

-cheaper, easier and more common to do with the correct way.

Edited by Peter89

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...