Jump to content
SAU Community

Recommended Posts

Here is a 6266 on a 2.6 on what I assume is the same dyno. Notice it goes to 210km/h so scaling is different.

Assuming 8k limit, @135km/h its on full song at about 5200.

post-24984-0-24159900-1393582307.jpg

Edited by burn4005

True ebough, if its 7.5 its more like 5k.

I'd be interested to hear what the scaling actually is. I've always liked the efr83s as my next turbo, so if he's let off at 7.5k ish and making that power on a 2.6 I'll be extremely impressed with it.

As with most things I don't think the dyno plot can explain the response of it, but I'm betting its miles better than dash 5s at circa 2 bar. The efr looks like it comes on very smoothly.

Edited by burn4005

True ebough, if its 7.5 its more like 5k.

I'd be interested to hear what the scaling actually is. I've always liked the efr83s as my next turbo, so if he's let off at 7.5k ish and making that power on a 2.6 I'll be extremely impressed with it.

As with most things I don't think the dyno plot can explain the response of it, but I'm betting its miles better than dash 5s at circa 2 bar. The efr looks like it comes on very smoothly.

Going off what Brett has said. 22 psi was reached at 4300 RPM which on that graph is 105 km/h. It's making just on 300 kW at that point.

Posting on behalf of "Reaper".

Stock N1 engine (V spec II nur)

Borgwarner EFR 8374 1.05 AR rear

AI industries surge tank and Holley 1800 dominator pump with Walbro E85 intank pump

Bosch 2200cc injectors

Tial 44mm wastegates

Full Race twin scroll

4" dump into 3.5" kakimoto exhaust

ATS carbon twin clutch

HKS 100mm intercooler

HKS Step 1 V cam (248 @ 8.6mm)

AAF5E4D7-F072-4218-B83D-7D64932E8EAD_zps

Jezzebelle stopped there because of the standard engine.

* Green line is as it was dropped off, Red line was the final result.

stock longblock, small cams and simple setup! this car is probably much more fun than a dynosheet can explain, hopefully Reaper is pleased with the outcome

  • Like 1

2jz with twin 6258s -- slightly OT, but too cool not to share:

post-28839-0-12126500-1442017805_thumb.jpg

"Geoff, wanted to keep you in the loop. Re dyno'd the twin 6258 IWG car on E85. Got her to 32-33 psi and ended up with 922 whp and 790 tq at 4600 rpm !! This is a 8.5-1 engine with a stock head and 264 stock base circle cams. Wowzer…I attached the dyno chart with the C16 vs E85 max effort pulls.. So impressed really. Cant wait to fire my car up with 7163’s…Thank you

Eric"

Edited by Full-Race Geoff
  • Like 1

stock longblock, small cams and simple setup! this car is probably much more fun than a dynosheet can explain, hopefully Reaper is pleased with the outcome

at 4k $ the v-cam are far from ''small simple cams '' IMO :)

Edited by cobrAA

at 4k $ the v-cam are far from ''small simple cams '' IMO :)

Its a type a vcam intake with a type b poncam exhaust so they are pretty small especially considering no porting or anything at all.

  • Like 1

5th gear, 285/30/18 rsr's and standard 34 gtr diff ratios with the standard 6 speed

Can't have been 5th gear.

5th @8000rpm is 220. top of 4th is 168km/h. which matches plot exactly.

so full boost@115km/h is 5475rpm.

300kw @ 5000rpm

400kw @ 6000rpm

***ignore above.. bad maths***

Edited by burn4005

whoops! they are, good pickup.. sorry i under calculated the tyre circumference.

using circumference 1973.55mm (https://www.mcgrefer.com/sizeinfo/2853018) for a 285/30/R18

speed peak of dyno of 169km/h in each gear:

3rd (1,685): 8500rpm.

4th: (1,312) 6650rpm

5th: (1.000) 5050rpm

it appears it was done in 3rd.. could an 8500rpm readline be correct?

that means spooling (10psi) around 4500 and full boost (27psi) at 5800rpm

Edited by burn4005

whoops! they are, good pickup.. sorry i under calculated the tyre circumference.

using circumference 1973.55mm (https://www.mcgrefer.com/sizeinfo/2853018) for a 285/30/R18

speed peak of dyno of 169km/h in each gear:

3rd (1,685): 8500rpm.

4th: (1,312) 6650rpm

5th: (1.000) 5050rpm

it appears it was done in 3rd.. could an 8500rpm readline be correct?

that means spooling (10psi) around 4500 and full boost (27psi) at 5800rpm

No.

BDD1D388-D7FB-4173-A70D-1D94542F4DDE_zps

There is a graph from very early on in the tuning process. 10 psi at 4500?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
    • So 10/10 times that code is coil packs? I mean if that's the case ill drop the $400USD or so to replace them. I didn't know these cars threw codes before the issue became an issue.
×
×
  • Create New...