Jump to content
SAU Community

Recommended Posts

Get some neg camber on that sucker - STAT!! 4mm different offset than mine (+22) and your's is full mexican!

I fitted my bluetooth adaptor for the headunit, so now I can take and make calls without worry of getting busted on the phone.

i will hit the coilover soon enough if i put too much in... its got like 1.5 degrees now so NOTHING... just lipped the gaurds more and not touching at all anymore :)

they were +30 with a 5mm spacer.

So that confirms the ideal M35 fitment as 9.5 +35 offset.

Oh and they look insane! so tough!

come again?

if they were +30 and he added a 5mm spacer, that would mean that they are now sitting effectively at +25

or if they are +35 with a 5mm spacer then they would be effective +30

etc

finally got around to aligning mine, and very happy - exactly what i wanted (well maybe closer to 3 deg neg on front but 2 is fine) :P

18x9.5+2

18x9.5+1

front -2 deg camber

rears -.5 deg camber

100_1405plateless.jpg

100_1413plateless.jpg

100_1409plateless.jpg

how the driveway go mike?

yeah not too bad, no dramas getting out and only a little bit of rubbing from the front bar getting in surprisingly.

the wheel aligners was another story.. had to have a couple of blokes push me up their driveway cos i got beached sea-sawing :ph34r:

I accidentally bought some wheels when I went to get a fresh set of tyres... 19x9.5 +35 with 5mm spacer on all 4 fit peeeeerfect.

stagea.jpg

I will get some better photos soon.

NICE!!!

might have to do my headlights soon!.....once I stop buying other parts!!!

I accidentally bought some wheels when I went to get a fresh set of tyres... 19x9.5 +35 with 5mm spacer on all 4 fit peeeeerfect.

stagea.jpg

I will get some better photos soon.

LOL @ "accidentally" bought new wheels...

LOL @ "accidentally" bought new wheels...

lol I just accidently bought a 15g R33 GTR

going to sydney soon to pickup

must sell the track car now

currently fitting wilwood brakes, to put the brakes back on the r32.

might end up selling the stagea if I enjoy the gtr too much. or vice versa

Well it seems I need a different loom and a relay of some sort. :D

do you mean you're putting in the little motor that helps close that last little bit or the one where you push the button and the whole tale gate opens and closes?

if its the latter, where did you get it from and how much? i like gadgets :P

Well it seems I need a different loom and a relay of some sort. :wub:

If you can get a part number (and a picture) for the relay i have a box full of relays and resistors and other odd little electrical boxes left over from my wrecked car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...