Jump to content
SAU Community

Recommended Posts

Fitted an SAFC II to the M35 today. I had it lying in my cupboard for the last 2 years, and thought it may come in handy! Only wired it and set it up for now. Need to make a mount and fit it stealth somwhere, then get on the dyno when I have finished the front of the exhaust to tune it.

I was going to post pics of the Greddy boost gauge I got from FR33K, but he sold me a broken/damaged unit :(

Went out today and picked up a nice Defi boost gauge with controller unit II THAT WORKS!

I'll get it installed on Monday hopefully.

Hey gtrwagon

did you contact Aleks before you went and slagged him off in numerous threads?

He's a top bloke and I'm sure he wouldve offered you a refund if you explained the problem

he sells heaps of parts on here and he wouldn't knowingly sell broken shit

dry your eyes,it was only 50 bucks,and if you hadn't of made a twat out of yourself and actually contacted him about it you would gotten your money back I'm sure.you never know,if you man up and contact him you might even still get a refund

pull your head in

Hey gtrwagon

did you contact Aleks before you went and slagged him off in numerous threads?

He's a top bloke and I'm sure he wouldve offered you a refund if you explained the problem

he sells heaps of parts on here and he wouldn't knowingly sell broken shit

dry your eyes,it was only 50 bucks,and if you hadn't of made a twat out of yourself and actually contacted him about it you would gotten your money back I'm sure.you never know,if you man up and contact him you might even still get a refund

pull your head in

And when did you two start dating? I don't remember asking his bitch for comments? It wasn't $50 it was $60, as I kindly added $10 for postage which he didn't ask for. I have been more than fair waiting 2 weeks for a broken gauge. I don't want my money back either. If he needs $60 so badly as to rip people off, he can keep it. But I have ever right to warn others. Which I will gladly do. Should I go into the PM I sent asking (after waiting a week) would he kindly send it to my work place instead, as I am now back at work, to which I got no reply and it was sent to my house (a week later) and was on my door step when I got home. Yeah, top seller - highly recommended NOT!

Edited by GTRWAGON

I apologize gtrgagon,I feel bad know

Bitch? Hahaha yes,Aleks is a strong yet gentle lover

retard?you Get a boost gauge 'fitted' at a mechanics

you didn't answer my question

did you contact Aleks to let him know there was a problem before you bagged him out?

Maybe couldve been gone about abit better?

lol...... love to know how much u paid for the fitment...

pos neg .... oh and the boost line...

have u tried sucking on the vac line gtrwagon??? i know aleks and he wouldnt sell you shit??

grow up n stop slagging ppl for nothing.

changed the timingbelt on my stag today

grow up n stop slagging ppl for nothing.

Since when is selling someone broken goods nothing?

I know your all a bunch of mates and will stick together cause "he's a good bloke" blah blah blah

But it doesn't change the fact the gauge was broken.

As for paying to get it installed - I have mates too, no charge.

Blizzerd, the 34R rims look sweet! Wish I had the cash to splurge on a set :P

GTRWAGON, I'm sure most of us are reasonable people and would of offered you a refund after a PM. The item might of been broken without his knowledge...

Enough whinging from EVERYONE about this boost gauge or temp bannings will be handed out.

If a dud product is sold, take it up with the seller and see if you can have it sorted out. Future posts on this subject will be treated as if you're slagging a business on here...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...