Jump to content
SAU Community

Recommended Posts

Just gave mine a bit of love ( oil and filter ) the good news - found split fire coilpacks and good plugs in there :P , bad news found timing belt looked like it belonged to Noah :) so had to change that aswell.

The Apexi ECU Harness arrived today, so I will have to get onto the install Sunday, I'm back at work so cbf after work.

Pics of my FMIC install as promised, did it Sat nite/Sun morning.

007.jpg

That FMIC looks perfect,did you have to cut the reo?or do any other "adjustment"?

Removed old coil pack wiring harness to install new one which had just arrived from JustJap... only to find the clips don't match... GREAT!

Next is to replace the xanavi and rear shocks... hopefully these go a bit smoother!

Impul ECU got installed. Im now driving a different car. This thing puts me on my arse real quick :(

wait till it finish's tuning it's self.... :)

BTW.....here's my new Nismo/greddy Combo!

post-37023-1283901440_thumb.jpg

Edited by Jetwreck
That FMIC looks perfect,did you have to cut the reo?or do any other "adjustment"?

Yeaah I had to cut a bit out of the reo bar. I do need to make up some custom brackets to bolt it in properly.

heatwrapped some Intercooler piping, dropped in some bcp6res11 plugs.

didnt gap them down to .8 left them at 1.1mm.

drives very well indeed. maybe even slightly better fuel economy.

also reflashed my aem fic/8 piggyback to a new updated firmware. reset the tune, altered afm voltage settings, seems to have more poke up around 6000rpm.

need to get back on a dyno to check out the tune

edit: also bought mike's momo steering wheel :thumbsup:

ordered front and rear camber arms

got a new boost gauge hooked up (apexi copy i got off my mate for free)

much easier to read without the smoked lens and its a mechanical one, not stepper motor

also took out the turbo timer cos i don't use it anymore, does weird things with the alarm - if anyone wants it send me a pm (greddy full auto turbo timer with plug and play loom)

Roof rail replacement kit finally arrived today: WUHOO!!! It's only taken 2 years to get this sorted! Also, Bilstein re-valve kit arrived a couple of days ago: Just need to collect my new daily driver (Hopefully next week), so I can get the Stag sorted...

momo wheel is on

woot

You should have opted for a R34 GTR/ GTT manual wheel though, comfy feel and also a tad smaller. No disrepsect Mike.

I know of a nice n/a grille that would look good on yer car, pm me bro.

Edited by dirtyRS4

5k service + fuel filter (which I i'm pretty sure has been there since factory :cool: )

Filter was a bitch!

CHanged oil to Nulon 10-40 fully synthetic, seems to be revving much more freely. IT's having a lot of trouble holding traction, mind you it is damp. I'll have to wait until it's dry for a proper test.

Rear upper camber arms have arrived also, will put them in soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...