Jump to content
SAU Community

Recommended Posts

So we picked up the wife's A3 at the Goldy yesterday (came up from Melb by truck), & did all the req'd crap to get it registered. (Who new a set of Euro plates cost $400 :O What a rip off!)

The RACV report we got before buying the vehicle said the car was due for a service so I had a look in the log book. Impressively the service intervals are at 15,000kms (typical of a lot of vehicles, I know) & so I was expecting the last service to have been done ~15K ago. But no, the car totally missed the last service so it's nearly 30K since it's last oil change!!!

Furthermore, it looks like the service it missed was a bigish one, with all the engine belts needing to be changed. Grrr.

Since this is the recipe thread, I'm thinking of developing a recipe for broiled car salesman. Guaranteed to leave a bad taste in your mouth, lol.

In other news... I'm a lazy fecker. Dales bar isn't on yet, so I had a look at where it goes in some pics. Now I haz a worry. I have a lot of (aftermarket) pipework through there, so I hope it fits.

Be annoyed if it doesn't.

So we picked up the wife's A3 at the Goldy yesterday (came up from Melb by truck), & did all the req'd crap to get it registered. (Who new a set of Euro plates cost $400 :O What a rip off!)

The RACV report we got before buying the vehicle said the car was due for a service so I had a look in the log book. Impressively the service intervals are at 15,000kms (typical of a lot of vehicles, I know) & so I was expecting the last service to have been done ~15K ago. But no, the car totally missed the last service so it's nearly 30K since it's last oil change!!!

Furthermore, it looks like the service it missed was a bigish one, with all the engine belts needing to be changed. Grrr.

Since this is the recipe thread, I'm thinking of developing a recipe for broiled car salesman. Guaranteed to leave a bad taste in your mouth, lol.

car salesmen cant be trusted!!

I would be sending the car back

Leon, that is pretty disapponting, knowing that you would have asked him about service history and when the thing was last serviced.

You could obviously ask some appropriate questions of the Gent, and make your feelings felt. Get him to pay for the service at your nearest audi dealer

Funny, I thought I asked all the right questions. His answer when asked about the service history was 'it has the service log book & has been serviced at an Audi dealership from new". Obviously that doesn't mean it is up to date on the services. I very nearly asked him to scan in the log book & email it to me, but I'd already bugged him about a million other things (had dent doctor fix a small dent etc) & I expected it would need a service anyway :/ .

It's booked in on Friday to get a long needed going over. I'm using a local "European specialist" who will hopefully know what he's looking at (doesn't hold breath). And since it has a nationwide warranty, I'm telling him to look closely at anything that could be considered prone to failure. Won't be long & I'll be DIY'ing this one too, I suppose.

Ultimately the missus is over the moon with hew 'new' car (also means I'm free to play M35 to my hearts content :D ) & we got what I consider to be a bargain in the A3 field at present. All happy in the commsman household - for now.

Oh, nearest Audi dealer is about 100km away.

Edited by Commsman

Euro specialist should be fine with it I guess. I'm far from an expert, but I gathered that most of the VAG cars use the same 2.0 diesel, maybe gearbox?

Anyway, as long as it looks fairly clean down the guys of it, should be fine. I had a Lexus that skipped a service altogether, was fine, olds have a rover that was the same, still keeps on going, only with a appetite for suspension parts/bushes.

Not that i'd recommend it at all, but its not the end of the world by a long shot.

Euro specialist should be fine with it I guess. I'm far from an expert, but I gathered that most of the VAG cars use the same 2.0 diesel, maybe gearbox?

I thought they were all exactly the same, but there are minor differences according to the experts. My guess is they are mainly system control (ECU etc) or relatively insignificant ancillary equipment, but I really don't know.

It is certainly a clean car. Looks like it's never been driven out of the city. It's all gonna change now, lol.

Oh, I just stuck a torch under there to have a look. I couldn't remember the exact route of the external gate plumb back. There's also another exhaust brace that fits up in there too that I remembered. Been at work, only just got home.

When's the key turning on yours?

It lives, I started it tonight. Just a few little jobs to do and it's back on the road. I need to learn how to bleed the Attessa and solder a few wires back together under the dash. Power steering was a bitch to bleed.

It lives, I started it tonight. Just a few little jobs to do and it's back on the road. I need to learn how to bleed the Attessa and solder a few wires back together under the dash. Power steering was a bitch to bleed.

lolz......attessa is fun fun fun!!!

It lives, I started it tonight. Just a few little jobs to do and it's back on the road. I need to learn how to bleed the Attessa and solder a few wires back together under the dash. Power steering was a bitch to bleed.

How'd you do the PS? Just lock to lock about 30 times?

I had to do mine, since we were pushing the car around between workshops.

Attesa Plug under the dash. 2 person job- why 3 Iain - dont need to stay in the boot!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...