Jump to content
SAU Community

Recommended Posts

looking at buying one of these cheap turbos off ebay they are $700 or so GT35R internal gate is what has me thinking of getting it and price i dunno if its decent for price or whatever but its so called 500HP rating .63 AR is what is catching my eye.

Has anyone used these turbos or are they not worth getting involed with or even if i bought one and got say garret to check it out or somthing.

would it be good for an RB25 im guessing spool up time would be very close to a standard RB25 T3 and internally gate would mean less piping and being able to retain standard manifold.

Link to comment
https://www.sau.com.au/forums/topic/343210-gt35r-from-ebay-on-rb25/
Share on other sites

Laggy unbalanced bush bearing copy, (I have one here). It would be better to chuck in another few hundred and buy a good secondhand Garrett one from the for sale section, there have been a few in there recently.

The housing casting are generally ok. So dump the old chra, build a new core, machine the both housings to suit, and it will work.

so basically all you will be doing is buying the turbo just for the housings

sounds like alot of money when your going to bin most of the parts

may as well buy a decent turbo to start of with

The housing casting are generally ok. So dump the old chra, build a new core, machine the both housings to suit, and it will work.

If he bought this turbo by accident I would recommend him to see you about the above. However, seeing as its $700 and he hasnt bought it yet, I am sure your CHRA wont cost under $1000 which is around what this turbo is worth new genuine from garrett.

A .63 non gated one went for $1000 recently on this site I believe, brand new also.

Another thing to note which is yet to be covered, OP stated he assumes it will spool similar to factory. I would like to put on the record that a GT35 of any sort will not spool anything like factory. While I have plenty of faith in them the best description for it compared to factory (in lamens terms) would be laggy.

Consider a highflow if you have the stock turbo at home, they are good when on a tight budget. Hypergear can help.

If money is not an issue, think "setup" rather than "bolt on" and go for the good sheit.

The housing casting are generally ok. So dump the old chra, build a new core, machine the both housings to suit, and it will work.

... so you're advocating paying $700 plus whatever machining is worth for a couple of housings?

OP: You don't want to do this. Buy a complete new turbo from a place with a warranty; if the budget doesn't

stretch save for a little longer.

Or find someone on this forum selling a used turbo that's willing to have it professionally inspected (at your cost).

Cheers,

Saliya

^ Agreed. The Garrett CHRA is around $1100 - It would cost you MORE to machine/refit than to buy Garrett original in the first place.

You also don't know what the casting it like, its simply a gamble. A very stupid one.

As for the turbo itself: "Brand New GT35 Style"

Keyword - Style.

Its a knock off. Any turbo that retails @ $1700 - should have alarm bells ringing when its $1000 cheaper.

Stay away.

Some mates took a punt and ordered one of the external gate GT35r style turbo's from the states. On the stock manifold with the gate plumbed in between the mani and turbs on a adaptor the gate opens at 3700rpm. Made 320 @ 14psi with a real quick shitty tune.

How long it lasts for is anyone's guess...

<<Thread Hijack Alert>>

I've got a KKR560 on my car. I've had the wastegate hole made bigger etc, so it doesn't have the overboosting problem anymore.

How much would it cost to get it rebuild as a ball bearing unit? I'm assuming that will just bolt straight back on with no modifications? The turbo is only oil-cooled (not water-cooled)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...