Jump to content
SAU Community

Recommended Posts

looking at buying one of these cheap turbos off ebay they are $700 or so GT35R internal gate is what has me thinking of getting it and price i dunno if its decent for price or whatever but its so called 500HP rating .63 AR is what is catching my eye.

Has anyone used these turbos or are they not worth getting involed with or even if i bought one and got say garret to check it out or somthing.

would it be good for an RB25 im guessing spool up time would be very close to a standard RB25 T3 and internally gate would mean less piping and being able to retain standard manifold.

Link to comment
https://www.sau.com.au/forums/topic/343210-gt35r-from-ebay-on-rb25/
Share on other sites

Laggy unbalanced bush bearing copy, (I have one here). It would be better to chuck in another few hundred and buy a good secondhand Garrett one from the for sale section, there have been a few in there recently.

The housing casting are generally ok. So dump the old chra, build a new core, machine the both housings to suit, and it will work.

so basically all you will be doing is buying the turbo just for the housings

sounds like alot of money when your going to bin most of the parts

may as well buy a decent turbo to start of with

The housing casting are generally ok. So dump the old chra, build a new core, machine the both housings to suit, and it will work.

If he bought this turbo by accident I would recommend him to see you about the above. However, seeing as its $700 and he hasnt bought it yet, I am sure your CHRA wont cost under $1000 which is around what this turbo is worth new genuine from garrett.

A .63 non gated one went for $1000 recently on this site I believe, brand new also.

Another thing to note which is yet to be covered, OP stated he assumes it will spool similar to factory. I would like to put on the record that a GT35 of any sort will not spool anything like factory. While I have plenty of faith in them the best description for it compared to factory (in lamens terms) would be laggy.

Consider a highflow if you have the stock turbo at home, they are good when on a tight budget. Hypergear can help.

If money is not an issue, think "setup" rather than "bolt on" and go for the good sheit.

The housing casting are generally ok. So dump the old chra, build a new core, machine the both housings to suit, and it will work.

... so you're advocating paying $700 plus whatever machining is worth for a couple of housings?

OP: You don't want to do this. Buy a complete new turbo from a place with a warranty; if the budget doesn't

stretch save for a little longer.

Or find someone on this forum selling a used turbo that's willing to have it professionally inspected (at your cost).

Cheers,

Saliya

^ Agreed. The Garrett CHRA is around $1100 - It would cost you MORE to machine/refit than to buy Garrett original in the first place.

You also don't know what the casting it like, its simply a gamble. A very stupid one.

As for the turbo itself: "Brand New GT35 Style"

Keyword - Style.

Its a knock off. Any turbo that retails @ $1700 - should have alarm bells ringing when its $1000 cheaper.

Stay away.

Some mates took a punt and ordered one of the external gate GT35r style turbo's from the states. On the stock manifold with the gate plumbed in between the mani and turbs on a adaptor the gate opens at 3700rpm. Made 320 @ 14psi with a real quick shitty tune.

How long it lasts for is anyone's guess...

<<Thread Hijack Alert>>

I've got a KKR560 on my car. I've had the wastegate hole made bigger etc, so it doesn't have the overboosting problem anymore.

How much would it cost to get it rebuild as a ball bearing unit? I'm assuming that will just bolt straight back on with no modifications? The turbo is only oil-cooled (not water-cooled)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...