Jump to content
SAU Community

Recommended Posts

This has always puzzled me....

I know the following have the 6 speed getrag gearbox:

R34 GTR

M3 EVO

E39 M5

Supra, Non VVTI/VVTI

Mitsubishi GTO

Are there others that use it?

Anyway, are the boxes all the same? Ie interchangeable... Someone know? Cheers.

no?

No they are not interchangeable, and in most cases are completely different gearbox designs between different cars. Getrag gearboxes usually have an integrated bellhousing, i.e. designed to fit a specific engine block and can't be removed. Because of this, even gearboxes of the same model, e.g. Getrag 260, will not be interchangeable. The Getrag 260 was used in VS (series 3) / VT / VX / VY V6 Commodores, Beamers and Jags...yet they are not intercompatible between the manufacturers (unless you wanna do some cutting and welding conversion work).

Your Supra uses a Getrag V160 or V161, for reference. I am not certain if this gearbox was placed in any other vehicle, but I doubt it.

Getrags also have the wonderful advantage of being European and therefore rather expensive to repair.

S15 uses an Aisin 6 speed, which has an integrated bellhousing despite being much the same gearbox used in the Lexus IS200, Mazda MX5, Mazda RX8 and Honda S2000 :rolleyes:

Aisin also produced the 6 speed used in the VZ Commodore V6.

Also, the S15 gearbox is not that weak - two bathurst 24 hour races, several endurance and we've never broken one. People just like to drift with triple plate clutches and 250rwkw through a drivetrain that was originally designed to handle 180fkw~ from factory in a lightweight sports coupe...

Yeah, not a fan personally...I've sold heaps of S14 gearboxes to S15 owners who are under the impression the S14 is much stronger. I don't know where the consensus came from...I disagree, but am happy to take their 6 speed off their hands.

In my opinion the Aisin is a much better box all round. The only advantage of the S14 box is that you can install a PPG gearset in it. In standard form though, it's still just a small sports sedan gearbox and nothing that I'd want to go drifting with anyway...let alone downgrading retrograding my S15 and losing an overdrive.

ya but for track purposes, 5 speed is much better supposedly...even same with the 34 gtrs....they convert to 5 speed for better gear ratios and power along each gears....

There's a cheaper way to make the r34's move a bit quicker than having to convert to 5sp.

Yeah, not a fan personally...I've sold heaps of S14 gearboxes to S15 owners who are under the impression the S14 is much stronger. I don't know where the consensus came from...I disagree, but am happy to take their 6 speed off their hands.

In my opinion the Aisin is a much better box all round. The only advantage of the S14 box is that you can install a PPG gearset in it. In standard form though, it's still just a small sports sedan gearbox and nothing that I'd want to go drifting with anyway...let alone downgrading retrograding my S15 and losing an overdrive.

I see...

I would have thought the same as you Birds.

The 6 speed in the S15 seems very good.

Has "a" Getrag 6 speed...your focus uses a transaxle which altogether is very different from the rest of these RWD platforms...the Calibra Turbo also used a Getrag 6 speed transaxle in AWD form.

Has "a" Getrag 6 speed...your focus uses a transaxle which altogether is very different from the rest of these RWD platforms...the Calibra Turbo also used a Getrag 6 speed transaxle in AWD form.

And look how well THAT turned out...lol

Hahaha well, transfer case aside, the gearbox isn't too bad :laugh:

More of a cruiser than a performance vehicle though. I'd never run insane amounts of power through one of those cars.

This has always puzzled me....

I know the following have the 6 speed getrag gearbox:

R34 GTR

M3 EVO

E39 M5

Supra, Non VVTI/VVTI

Mitsubishi GTO

Are there others that use it?

Anyway, are the boxes all the same? Ie interchangeable... Someone know? Cheers.

Depends 'which' 6 speed you're talking about.

I know there's a 420G used in the BMW E39 which is a gearbox for RWD. The 6spd 466 AWD transaxle series is in lots of Porsche's, Audis and the GTO, the 448 6speed AWD transaxle tends to get used in the upper end Porsches. For what its worth, they are capable of holding big horsepower around 450 or so stock and after that they do need some (relatively inexpensive) bracing modifications to the housing and transfer cases, if you do manage to break one they do cost a veritable fortune. Most people break them because they're terrible, the boxes themselves are actually quite good! :(

In my experience a lot of them aren't interchangeable if that makes it any easier for you. The very hard way is to contract Getrag and be prepared to go slightly crazy in the process...

Edited by MK2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...