Jump to content
SAU Community

Recommended Posts

This has always puzzled me....

I know the following have the 6 speed getrag gearbox:

R34 GTR

M3 EVO

E39 M5

Supra, Non VVTI/VVTI

Mitsubishi GTO

Are there others that use it?

Anyway, are the boxes all the same? Ie interchangeable... Someone know? Cheers.

no?

No they are not interchangeable, and in most cases are completely different gearbox designs between different cars. Getrag gearboxes usually have an integrated bellhousing, i.e. designed to fit a specific engine block and can't be removed. Because of this, even gearboxes of the same model, e.g. Getrag 260, will not be interchangeable. The Getrag 260 was used in VS (series 3) / VT / VX / VY V6 Commodores, Beamers and Jags...yet they are not intercompatible between the manufacturers (unless you wanna do some cutting and welding conversion work).

Your Supra uses a Getrag V160 or V161, for reference. I am not certain if this gearbox was placed in any other vehicle, but I doubt it.

Getrags also have the wonderful advantage of being European and therefore rather expensive to repair.

S15 uses an Aisin 6 speed, which has an integrated bellhousing despite being much the same gearbox used in the Lexus IS200, Mazda MX5, Mazda RX8 and Honda S2000 :rolleyes:

Aisin also produced the 6 speed used in the VZ Commodore V6.

Also, the S15 gearbox is not that weak - two bathurst 24 hour races, several endurance and we've never broken one. People just like to drift with triple plate clutches and 250rwkw through a drivetrain that was originally designed to handle 180fkw~ from factory in a lightweight sports coupe...

Yeah, not a fan personally...I've sold heaps of S14 gearboxes to S15 owners who are under the impression the S14 is much stronger. I don't know where the consensus came from...I disagree, but am happy to take their 6 speed off their hands.

In my opinion the Aisin is a much better box all round. The only advantage of the S14 box is that you can install a PPG gearset in it. In standard form though, it's still just a small sports sedan gearbox and nothing that I'd want to go drifting with anyway...let alone downgrading retrograding my S15 and losing an overdrive.

ya but for track purposes, 5 speed is much better supposedly...even same with the 34 gtrs....they convert to 5 speed for better gear ratios and power along each gears....

There's a cheaper way to make the r34's move a bit quicker than having to convert to 5sp.

Yeah, not a fan personally...I've sold heaps of S14 gearboxes to S15 owners who are under the impression the S14 is much stronger. I don't know where the consensus came from...I disagree, but am happy to take their 6 speed off their hands.

In my opinion the Aisin is a much better box all round. The only advantage of the S14 box is that you can install a PPG gearset in it. In standard form though, it's still just a small sports sedan gearbox and nothing that I'd want to go drifting with anyway...let alone downgrading retrograding my S15 and losing an overdrive.

I see...

I would have thought the same as you Birds.

The 6 speed in the S15 seems very good.

Has "a" Getrag 6 speed...your focus uses a transaxle which altogether is very different from the rest of these RWD platforms...the Calibra Turbo also used a Getrag 6 speed transaxle in AWD form.

Has "a" Getrag 6 speed...your focus uses a transaxle which altogether is very different from the rest of these RWD platforms...the Calibra Turbo also used a Getrag 6 speed transaxle in AWD form.

And look how well THAT turned out...lol

Hahaha well, transfer case aside, the gearbox isn't too bad :laugh:

More of a cruiser than a performance vehicle though. I'd never run insane amounts of power through one of those cars.

This has always puzzled me....

I know the following have the 6 speed getrag gearbox:

R34 GTR

M3 EVO

E39 M5

Supra, Non VVTI/VVTI

Mitsubishi GTO

Are there others that use it?

Anyway, are the boxes all the same? Ie interchangeable... Someone know? Cheers.

Depends 'which' 6 speed you're talking about.

I know there's a 420G used in the BMW E39 which is a gearbox for RWD. The 6spd 466 AWD transaxle series is in lots of Porsche's, Audis and the GTO, the 448 6speed AWD transaxle tends to get used in the upper end Porsches. For what its worth, they are capable of holding big horsepower around 450 or so stock and after that they do need some (relatively inexpensive) bracing modifications to the housing and transfer cases, if you do manage to break one they do cost a veritable fortune. Most people break them because they're terrible, the boxes themselves are actually quite good! :(

In my experience a lot of them aren't interchangeable if that makes it any easier for you. The very hard way is to contract Getrag and be prepared to go slightly crazy in the process...

Edited by MK2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...