Jump to content
SAU Community

Recommended Posts

The barrier is pretty much in the worst possible place, but it's where it needs to be to create the run off and define that part of the track.

The bumpy braking zone is definitely the problem but I agree with sav man, its not supposed to be easy.

IMO make the barrier as effective as possible at absorbing impact and leave those bump strips out of the inside of the chicane to stop cars getting airborne

I like Brundle and Coulthard. They bring intimate knowledge of driving, the tracks and the rules for some good commentary. It must be annoying for them to have to constantly cater to the newest f1 fans though when it comes to explaining things.

Monaco track seems to have not only bumps but things like manhole covers and drains (or things that look like them) all over it. Imagine trying to brake under 4-5 G's then sliding across them. It's a prestigious track but it begs for some big crashes.

Brundle has been losing his shit for a while now. Rambles on all the time and misses some of the most blatantly obvious stuff. Can see him being phased out soon

areed. in the massa (or perez) crash he kept going on about the right rear wheel not being held by the tethers in the crash. I immediately saw it was the left front TYRE that had come flying down (as evidenced by the left front wheel hanging of the car sans tyre) not the right rear wheel and tyre. sure enough when they lifted the car up, 4 wheels attached, only 3 tyres. with all the footage and info they have how do they so constantly stuff things up. he was all excited about pointing out a tether failure which didn't happen. the tyre burst off the rime which was probably more interesting anyway...

maybe he feels without murray walker there talking nonsense it's his turn to be the old fool...

It's part of the charicter of the track, doing stuff like that is how we end up with tilk tracks. It's the most prestigious race to win, it's not meant to be easy. Being a temp street circuit it would probably be easier to move the barrier anyway.

agreed. leave it alone. if 20 out of 22 drivers can manage going over it probably 150 times per race meet and the other 2 go over it 100 times but fk it up once that tells me it's fine as it is. smoothing shit out removes character. sure the tracks have to be driveable but they don't have to be easy. what if they removed what was left of the dipper at bathurst or what about the top of eau rogue where you turn into radillon? that's a crest and car gets light and tries to spit you off. that's what makes tracks interesting.

That bump in the road that they hit just as they enter the braking zone seems to be the cause of all the problems.

It's much smoother in GT5 ^_^

But the ripple-strips at the Pool chicane are hideously violent =[

louie really seems like the only guy thats going to do any damage to that points lead

carn bro, do it for the fans

Skybet sees it as all sewn up already- Lewis is paying $10 to win the title, whereas Seb's a mere $1.13. Say it ain't so :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...