Jump to content
SAU Community

Recommended Posts

James Allison has revealed that different engine mapping, a cracked exhaust and a long pit stop were the cause of Nick Heidfeld's Hungarian fire.

(pf1)

Heidfeld was forced to retire from the Hungarian GP when his Renault R31 caught fire after his pit stop. The German parked on the side of the track at the pit lane exit and quickly jumped out.

Marshals arrived at the burning car with fire extinguishers, however, one appeared to be injured when the left side of the car exploded, showering the track with debris.

"As with most accidents, several incidents combined to cause the fire that Nick suffered in Hungary," explained Renault's technical director.

"First of all, we ran a slightly different engine mapping strategy in qualifying, which produced hotter than normal exhausts. We believe that this elevated temperature and caused a preliminary crack in the exhaust pipe.

"We presume that the crack then propagated during the laps to the pit stop - this was not evident to us as we believe that the failure occurred upstream of the place where we have a temperature sensor. We believe that Nick then came in with a partially failed exhaust.

"This pit stop took longer than normal, the engine was left at high rpm for 6.3 sec, waiting for the tyre change to be completed.

"Under these conditions, a lot of excess fuel always ends up in the exhausts and their temperature rises at around 100°C/sec. This temperature rise was enough to finish off the partially failed pipe and to start a moderate fire under the bodywork."

As for the explosion, Allison said that "this was caused by the air bottle which supplies the air valves in the engine. It has overheated in the fire and failed."

The team has already spoken with the FIA about their findings with Allison saying they are doing everything to ensure there won't be a repeat of the incident.

"The incident was highly undesirable, as it has caused us to write off a chassis.

"We will take steps prior to the next race to reduce the likelihood of a further fire and to ensure that the air bottle cannot overheat.

"We are in touch with the FIA both to provide them with a full report of the incident and also to explain to them the actions we are taking to prevent a re-occurrence."

Mercedes GP are reportedly keen on signing former Ferrari technical director Aldo Costa as part of a 'profound restructuring of the team.

After a disappointing start to the Championship for Ferrari, Costa, who had been their technical director for just over three years, was replaced by Pat Fry.

And although the Scuderia said at the time that Costa would remain in an undefined position, it was announced in July that he would in fact be leaving.

The 50-year-old was placed on "gardening leave" until the end of the year.

However, Costa may not be without a job for too long as Mercedes GP are reportedly interested in signing him.

According to Auto Sprint, Merc GP team boss Ross Brawn, a former Ferrari man himself, wants Costa as part of a 'profound restructuring of the team.'

Brawn is believed to have already spoken to Dieter Zetsche, the head of Daimler, about his need to employ more technical staff in order to compete against the likes of McLaren, Ferrari and Red Bull.

And Costa is at the top of his list.

i dont think its the right move for them, but they do need to step up in 2012, so maybe doing something is better than nothing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...